Shell design An aerodynamic shell design constructed using an advanced lightweight composite poly-alloy A clear coat finish to protect paint & graphics Ventilation 17 points of ventilation with chin, side, forehead, top & rear vent 7 intake vents & 10 exhaust vents Peak A removable & adjustable (40 mm) screw-on peak Visor can also be used without the peak, side cover kit included Ear pocket Provides ample ear cavity space for most speaker systems Visor Pinlock-ready & tinted visors optionally available Sun visor Dark tinted inner flip-down sun visor system with left-side slide lever Retention system Microlock (quick release) Weight A large-size FX-41DS weighs 1.68kg or 3.69 lbs Certification This helmet model meets or exceeds both ECE 22.05 & DOT FMVSS-218 motorcycle helmet safety standards Removable, washable & custom sizeable interior The size of this helmet is based on a combination of four factors: outer shell size, inner EPS thickness, comfort liner thickness & cheek pad thickness. The fit of the helmet can be customized by replacing your existing cheek pads with thinner cheek pads (for a looser fit) or thicker cheek pads (for a tighter fit). The fit can also be customized by replacing your existing comfort liner with a thinner comfort liner (for a looser fit) or thicker comfort liner (for a tighter fit). Please refer to the shell, liner & cheek pad compatibility chart below. Keep in mind these components can only be replaced inside the group of sizes contained in each size range block. Shell & EPS Size XXS/XS/S M L/XL/XXL XXS XS S M L XL XXL Cheek pads (mm) 25 22 19 22 19 16 14 Confort-Liner (mm) 21 18 15 15 12 9 6 Note Please be aware, as long as nothing else is written in the item description: All helmets will be delivered only with the ECE certification by default all helmets that have a visor will be delivered with a clear visor, even if it is shown differently. ...

Shell design An aerodynamic shell design constructed using an advanced lightweight composite poly-alloy A clear coat finish to protect paint & graphics Ventilation 17 points of ventilation with chin, side, forehead, top & rear vent 7 intake vents & 10 exhaust vents Peak A removable & adjustable (40 mm) screw-on peak Visor can also be used without the peak, side cover kit included Ear pocket Provides ample ear cavity space for most speaker systems Visor Pinlock-ready & tinted visors optionally available Sun visor Dark tinted inner flip-down sun visor system with left-side slide lever Retention system Microlock (quick release) Weight A large-size FX-41DS weighs 1.68kg or 3.69 lbs Certification This helmet model meets or exceeds both ECE 22.05 & DOT FMVSS-218 motorcycle helmet safety standards Removable, washable & custom sizeable interior The size of this helmet is based on a combination of four factors: outer shell size, inner EPS thickness, comfort liner thickness & cheek pad thickness. The fit of the helmet can be customized by replacing your existing cheek pads with thinner cheek pads (for a looser fit) or thicker cheek pads (for a tighter fit). The fit can also be customized by replacing your existing comfort liner with a thinner comfort liner (for a looser fit) or thicker comfort liner (for a tighter fit). Please refer to the shell, liner & cheek pad compatibility chart below. Keep in mind these components can only be replaced inside the group of sizes contained in each size range block. Shell & EPS Size XXS/XS/S M L/XL/XXL XXS XS S M L XL XXL Cheek pads (mm) 25 22 19 22 19 16 14 Confort-Liner (mm) 21 18 15 15 12 9 6 Note Please be aware, as long as nothing else is written in the item description: All helmets will be delivered only with the ECE certification by default all helmets that have a visor will be delivered with a clear visor, even if it is shown differently. ...

Shell design An aerodynamic shell design constructed using an advanced lightweight composite poly-alloy A clear coat finish to protect paint & graphics Ventilation 17 points of ventilation with chin, side, forehead, top & rear vent 7 intake vents & 10 exhaust vents Peak A removable & adjustable (40 mm) screw-on peak Visor can also be used without the peak, side cover kit included Ear pocket Provides ample ear cavity space for most speaker systems Visor Pinlock-ready & tinted visors optionally available Sun visor Dark tinted inner flip-down sun visor system with left-side slide lever Retention system Microlock (quick release) Weight A large-size FX-41DS weighs 1.68kg or 3.69 lbs Certification This helmet model meets or exceeds both ECE 22.05 & DOT FMVSS-218 motorcycle helmet safety standards Removable, washable & custom sizeable interior The size of this helmet is based on a combination of four factors: outer shell size, inner EPS thickness, comfort liner thickness & cheek pad thickness. The fit of the helmet can be customized by replacing your existing cheek pads with thinner cheek pads (for a looser fit) or thicker cheek pads (for a tighter fit). The fit can also be customized by replacing your existing comfort liner with a thinner comfort liner (for a looser fit) or thicker comfort liner (for a tighter fit). Please refer to the shell, liner & cheek pad compatibility chart below. Keep in mind these components can only be replaced inside the group of sizes contained in each size range block. Shell & EPS Size XXS/XS/S M L/XL/XXL XXS XS S M L XL XXL Cheek pads (mm) 25 22 19 22 19 16 14 Confort-Liner (mm) 21 18 15 15 12 9 6 Note Please be aware, as long as nothing else is written in the item description: All helmets will be delivered only with the ECE certification by default all helmets that have a visor will be delivered with a clear visor, even if it is shown differently. ...

Shell design An aerodynamic shell design constructed using an advanced lightweight composite poly-alloy A clear coat finish to protect paint & graphics Ventilation 17 points of ventilation with chin, side, forehead, top & rear vent 7 intake vents & 10 exhaust vents Peak A removable & adjustable (40 mm) screw-on peak Visor can also be used without the peak, side cover kit included Ear pocket Provides ample ear cavity space for most speaker systems Visor Pinlock-ready & tinted visors optionally available Sun visor Dark tinted inner flip-down sun visor system with left-side slide lever Retention system Microlock (quick release) Weight A large-size FX-41DS weighs 1.68kg or 3.69 lbs Certification This helmet model meets or exceeds both ECE 22.05 & DOT FMVSS-218 motorcycle helmet safety standards Removable, washable & custom sizeable interior The size of this helmet is based on a combination of four factors: outer shell size, inner EPS thickness, comfort liner thickness & cheek pad thickness. The fit of the helmet can be customized by replacing your existing cheek pads with thinner cheek pads (for a looser fit) or thicker cheek pads (for a tighter fit). The fit can also be customized by replacing your existing comfort liner with a thinner comfort liner (for a looser fit) or thicker comfort liner (for a tighter fit). Please refer to the shell, liner & cheek pad compatibility chart below. Keep in mind these components can only be replaced inside the group of sizes contained in each size range block. Shell & EPS Size XXS/XS/S M L/XL/XXL XXS XS S M L XL XXL Cheek pads (mm) 25 22 19 22 19 16 14 Confort-Liner (mm) 21 18 15 15 12 9 6 Note Please be aware, as long as nothing else is written in the item description: All helmets will be delivered only with the ECE certification by default, even if it is shown differently. all helmets that have a visor will be delivered with a clear visor, even if it is shown differently. ...

Replacement sun visor for AFX helmets. Suitable for AFX FX-41DS *example picture ...

Replacement wind deflector for AFX helmets. Suitable for AFX FX-41DS *example picture ...

Visor for all FX-46 helmet. example picture ...

Helmet Technology Shell Design: A sleek European influenced shell design constructed using an advanced lightweight composite poly-alloy Face Shield: A flush-fit, quick release screw on face shield that is optically correct, compound-curved, scratch-resistant & protects against UV-rays Ventilation: 4 points of aerodynamically designed flush fit ventilation with chin, top, rear, & unique side extraction vents. 1 intake vents & 3 exhaust vents Inner sun shield: Smoke tinted inner flip down sun shield system with center slide lever 4 in 1: Helmet can be configured one of four different ways. Ships with all parts included This helmet model meets or exceeds both ECE 22.05 & DOT FMVSS-218 motorcycle helmet safety standards Retention system is microlock (quick release) A clear coat finish to protect paint & graphics A large-size FX-50 weighs 1.30kg or 2.8 lbs Removable, washable & custom sizable Interior AFX helmet liners & cheek pads are made with a hypoallergenic andanti-microbial nylon, most of which are removable &

Washable.

The size of this helmet is based on a combination of four factors: outer shell size, inner EPS thickness, comfort liner thickness & cheek pad thickness. The fit of the helmet can be customized by replacing your existing cheek pads with thinner cheek pads (for a looser fit) or thicker cheek pads (for a tighter fit). The fit can also be customized by replacing your existing comfort liner with a thinner comfort liner (for a looser fit) or thicker comfort liner (for a tighter fit). Please refer to the shell, liner & cheek pad compatibility chart below. Keep in mind these components can only be replaced inside the group of sizes contained in each size range block. Helmet Shell & EPS Size XS-M L-XXL XS S M L XL XXL Check Pad Thickness (mm) 48 44 40 36 32 28 Comfort Liner Thickness (mm) 12 10 12 8 8 4 Note Please note that as long as nothing else is written in the article description, all helmets that have a visor as standard will be delivered with a clear one, even if it is shown differently.



...

Helmet Technology Shell Design: A sleek European influenced shell design constructed using an advanced lightweight composite poly-alloy Face Shield: A flush-fit, quick release screw on face shield that is optically correct, compound-curved, scratch-resistant & protects against UV-rays Ventilation: 4 points of aerodynamically designed flush fit ventilation with chin, top, rear, & unique side extraction vents. 1 intake vents & 3 exhaust vents Inner sun shield: Smoke tinted inner flip down sun shield system with center slide lever 4 in 1: Helmet can be configured one of four different ways. Ships with all parts included This helmet model meets or exceeds both ECE 22.05 & DOT FMVSS-218 motorcycle helmet safety standards Retention system is microlock (quick release) A clear coat finish to protect paint & graphics A large-size FX-50 weighs 1.30kg or 2.8 lbs Removable, washable & custom sizable Interior AFX helmet liners & cheek pads are made with a hypoallergenic andanti-microbial nylon, most of which are removable &

Washable.

The size of this helmet is based on a combination of four factors: outer shell size, inner EPS thickness, comfort liner thickness & cheek pad thickness. The fit of the helmet can be customized by replacing your existing cheek pads with thinner cheek pads (for a looser fit) or thicker cheek pads (for a tighter fit). The fit can also be customized by replacing your existing comfort liner with a thinner comfort liner (for a looser fit) or thicker comfort liner (for a tighter fit). Please refer to the shell, liner & cheek pad compatibility chart below. Keep in mind these components can only be replaced inside the group of sizes contained in each size range block. Helmet Shell & EPS Size XS-M L-XXL XS S M L XL XXL Check Pad Thickness (mm) 48 44 40 36 32 28 Comfort Liner Thickness (mm) 12 10 12 8 8 4 Note Please be aware, as long as nothing else is written in the item description: All helmets will be delivered only with the ECE certification by default all helmets that have a visor will be delivered with a clear visor, even if it is shown differently.



...

Helmet Technology Shell Design: A sleek European influenced shell design constructed using an advanced lightweight composite poly-alloy Face Shield: A flush-fit, quick release screw on face shield that is optically correct, compound-curved, scratch-resistant & protects against UV-rays Ventilation: 4 points of aerodynamically designed flush fit ventilation with chin, top, rear, & unique side extraction vents. 1 intake vents & 3 exhaust vents Inner sun shield: Smoke tinted inner flip down sun shield system with center slide lever 4 in 1: Helmet can be configured one of four different ways. Ships with all parts included This helmet model meets or exceeds both ECE 22.05 & DOT FMVSS-218 motorcycle helmet safety standards Retention system is microlock (quick release) A clear coat finish to protect paint & graphics A large-size FX-50 weighs 1.30kg or 2.8 lbs Removable, washable & custom sizable Interior AFX helmet liners & cheek pads are made with a hypoallergenic andanti-microbial nylon, most of which are removable &

Washable.

The size of this helmet is based on a combination of four factors: outer shell size, inner EPS thickness, comfort liner thickness & cheek pad thickness. The fit of the helmet can be customized by replacing your existing cheek pads with thinner cheek pads (for a looser fit) or thicker cheek pads (for a tighter fit). The fit can also be customized by replacing your existing comfort liner with a thinner comfort liner (for a looser fit) or thicker comfort liner (for a tighter fit). Please refer to the shell, liner & cheek pad compatibility chart below. Keep in mind these components can only be replaced inside the group of sizes contained in each size range block. Helmet Shell & EPS Size XS-M L-XXL XS S M L XL XXL Check Pad Thickness (mm) 48 44 40 36 32 28 Comfort Liner Thickness (mm) 12 10 12 8 8 4 Note Please be aware, as long as nothing else is written in the item description: All helmets will be delivered only with the ECE certification by default all helmets that have a visor will be delivered with a clear visor, even if it is shown differently.



...