Shell design An aerodynamic shell design constructed using an advanced lightweight composite poly-alloy Cut out on shell sides to accommodate most neck brace designs A clear coat finish to protect paint & graphics Ventilation 11 points of ventilation with chin, side, forehead, top & rear vent 7 intake vents & 4 exhaust vents to maximize negative pressure suction Goggle guide on eyeport trim Goggle strap grabbers Peak A removable & adjustable (30 mm) screw-on visor Emergency quick release system It is a mechanism for trained emergency personnel to safely remove the cheek pads from the helmet while the helmet is still on the rider’s head Ear pocket Easy access ear pocket sized to fit all popular com systems Retention system Race approved Double D-Ring Weight A large-size FX-14 weighs 1.36kg or 3.00 lbs Certification This helmet model meets or exceeds both ECE 22.05 & DOT FMVSS-218 motorcycle helmet safety standards Removable, washable & custom sizeable interior The size of this helmet is based on a combination of four factors: outer shell size, inner EPS thickness, comfort liner thickness & cheek pad thickness. The fit of the helmet can be customized by replacing your existing cheek pads with thinner cheek pads (for a looser fit) or thicker cheek pads (for a tighter fit). The fit can also be customized by replacing your existing comfort liner with a thinner comfort liner (for a looser fit) or thicker comfort liner (for a tighter fit). Please refer to the shell, liner & cheek pad compatibility chart below. Keep in mind these components can only be replaced inside the group of sizes contained in each size range block. Shell & EPS Size XXS/XS/S M L/XL/XXL XXS XS S M L XL XXL Cheek pads (mm) 25 22 19 22 19 16 14 Confort-Liner (mm) 21 18 15 15 12 9 6 Note Please be aware, as long as nothing else is written in the item description: All helmets will be delivered only with the ECE certification by default ...

Shell design An aerodynamic shell design constructed using an advanced lightweight composite poly-alloy Cut out on shell sides to accommodate most neck brace designs A clear coat finish to protect paint & graphics Ventilation 11 points of ventilation with chin, side, forehead, top & rear vent 7 intake vents & 4 exhaust vents to maximize negative pressure suction Goggle guide on eyeport trim Goggle strap grabbers Peak A removable & adjustable (30 mm) screw-on visor Emergency quick release system It is a mechanism for trained emergency personnel to safely remove the cheek pads from the helmet while the helmet is still on the rider’s head Ear pocket Easy access ear pocket sized to fit all popular com systems Retention system Race approved Double D-Ring Weight A large-size FX-14 weighs 1.36kg or 3.00 lbs Certification This helmet model meets or exceeds both ECE 22.05 & DOT FMVSS-218 motorcycle helmet safety standards Removable, washable & custom sizeable interior The size of this helmet is based on a combination of four factors: outer shell size, inner EPS thickness, comfort liner thickness & cheek pad thickness. The fit of the helmet can be customized by replacing your existing cheek pads with thinner cheek pads (for a looser fit) or thicker cheek pads (for a tighter fit). The fit can also be customized by replacing your existing comfort liner with a thinner comfort liner (for a looser fit) or thicker comfort liner (for a tighter fit). Please refer to the shell, liner & cheek pad compatibility chart below. Keep in mind these components can only be replaced inside the group of sizes contained in each size range block. Shell & EPS Size XXS/XS/S M L/XL/XXL XXS XS S M L XL XXL Cheek pads (mm) 25 22 19 22 19 16 14 Confort-Liner (mm) 21 18 15 15 12 9 6 Note Please be aware, as long as nothing else is written in the item description: All helmets will be delivered only with the ECE certification by default ...

Shell design An aerodynamic shell design constructed using an advanced lightweight composite poly-alloy Cut out on shell sides to accommodate most neck brace designs A clear coat finish to protect paint & graphics Ventilation 11 points of ventilation with chin, side, forehead, top & rear vent 7 intake vents & 4 exhaust vents to maximize negative pressure suction Goggle guide on eyeport trim Goggle strap grabbers Peak A removable & adjustable (30 mm) screw-on visor Emergency quick release system It is a mechanism for trained emergency personnel to safely remove the cheek pads from the helmet while the helmet is still on the rider’s head Ear pocket Easy access ear pocket sized to fit all popular com systems Retention system Race approved Double D-Ring Weight A large-size FX-14 weighs 1.36kg or 3.00 lbs Certification This helmet model meets or exceeds both ECE 22.05 & DOT FMVSS-218 motorcycle helmet safety standards Removable, washable & custom sizeable interior The size of this helmet is based on a combination of four factors: outer shell size, inner EPS thickness, comfort liner thickness & cheek pad thickness. The fit of the helmet can be customized by replacing your existing cheek pads with thinner cheek pads (for a looser fit) or thicker cheek pads (for a tighter fit). The fit can also be customized by replacing your existing comfort liner with a thinner comfort liner (for a looser fit) or thicker comfort liner (for a tighter fit). Please refer to the shell, liner & cheek pad compatibility chart below. Keep in mind these components can only be replaced inside the group of sizes contained in each size range block. Shell & EPS Size XXS/XS/S M L/XL/XXL XXS XS S M L XL XXL Cheek pads (mm) 25 22 19 22 19 16 14 Confort-Liner (mm) 21 18 15 15 12 9 6 Note Please be aware, as long as nothing else is written in the item description: All helmets will be delivered only with the ECE certification by default ...

Shell design An aerodynamic shell design constructed using an advanced lightweight composite poly-alloy Cut out on shell sides to accommodate most neck brace designs A clear coat finish to protect paint & graphics Ventilation 11 points of ventilation with chin, side, forehead, top & rear vent 7 intake vents & 4 exhaust vents to maximize negative pressure suction Goggle guide on eyeport trim Goggle strap grabbers Peak A removable & adjustable (30 mm) screw-on visor Emergency quick release system It is a mechanism for trained emergency personnel to safely remove the cheek pads from the helmet while the helmet is still on the rider’s head Ear pocket Easy access ear pocket sized to fit all popular com systems Retention system Race approved Double D-Ring Weight A large-size FX-14 weighs 1.36kg or 3.00 lbs Certification This helmet model meets or exceeds both ECE 22.05 & DOT FMVSS-218 motorcycle helmet safety standards Removable, washable & custom sizeable interior The size of this helmet is based on a combination of four factors: outer shell size, inner EPS thickness, comfort liner thickness & cheek pad thickness. The fit of the helmet can be customized by replacing your existing cheek pads with thinner cheek pads (for a looser fit) or thicker cheek pads (for a tighter fit). The fit can also be customized by replacing your existing comfort liner with a thinner comfort liner (for a looser fit) or thicker comfort liner (for a tighter fit). Please refer to the shell, liner & cheek pad compatibility chart below. Keep in mind these components can only be replaced inside the group of sizes contained in each size range block. Shell & EPS Size XXS/XS/S M L/XL/XXL XXS XS S M L XL XXL Cheek pads (mm) 25 22 19 22 19 16 14 Confort-Liner (mm) 21 18 15 15 12 9 6 Note Please be aware, as long as nothing else is written in the item description: All helmets will be delivered only with the ECE certification by default ...

Replacement comfort-liner for AFX helmets Suitable for AFX FX-14 *example picture ...

Replacement comfort-liner for AFX helmets Suitable for AFX FX-14 *example picture ...

Features This helmet model meets or exceeds ECE 22.05 motorcycle helmet safety standards Retention system is D-Ring A clear coat finish to protect paint & graphics A youth large-size FX-142Y weighs 1.10kg or 2.20 lbs. Removable, washable & custom sizable Interior AFX helmet liners & cheek pads are made with a hypoallergenic andanti-microbial nylon, most of which are removable &

Washable.

The size of this helmet is based on a combination of four factors: outer shell size, inner EPS thickness, comfort liner thickness & cheek pad thickness. The fit of the helmet can be customized by replacing your existing cheek pads with thinner cheek pads (for a looser fit) or thicker cheek pads (for a tighter fit). The fit can also be customized by replacing your existing comfort liner with a thinner comfort liner (for a looser fit) or thicker comfort liner (for a tighter fit). Please refer to the shell, liner & cheek pad compatibility chart below. Keep in mind these components can only be replaced inside the group of sizes contained in each size range block. Helmet Shell & EPS Size YS-YL YS YM YL Check Pad Thickness (mm) 30 30 30 Comfort Liner Thickness (mm) 18 15 12 Note Please note that as long as nothing else is written in the article description, all helmets that have a visor as standard will be delivered with a clear one, even if it is shown differently.



...

Features This helmet model meets or exceeds ECE 22.05 motorcycle helmet safety standards Retention system is D-Ring A clear coat finish to protect paint & graphics A youth large-size FX-142Y weighs 1.10kg or 2.20 lbs. Removable, washable & custom sizable Interior AFX helmet liners & cheek pads are made with a hypoallergenic andanti-microbial nylon, most of which are removable &

Washable.

The size of this helmet is based on a combination of four factors: outer shell size, inner EPS thickness, comfort liner thickness & cheek pad thickness. The fit of the helmet can be customized by replacing your existing cheek pads with thinner cheek pads (for a looser fit) or thicker cheek pads (for a tighter fit). The fit can also be customized by replacing your existing comfort liner with a thinner comfort liner (for a looser fit) or thicker comfort liner (for a tighter fit). Please refer to the shell, liner & cheek pad compatibility chart below. Keep in mind these components can only be replaced inside the group of sizes contained in each size range block. Helmet Shell & EPS Size YS-YL YS YM YL Check Pad Thickness (mm) 30 30 30 Comfort Liner Thickness (mm) 18 15 12 Note Please be aware, as long as nothing else is written in the item description: All helmets will be delivered only with the ECE certification by default, even if it is shown differently. all helmets that have a visor will be delivered with a clear visor, even if it is shown differently.



...

Features This helmet model meets or exceeds ECE 22.05 motorcycle helmet safety standards Retention system is D-Ring A clear coat finish to protect paint & graphics A youth large-size FX-142Y weighs 1.10kg or 2.20 lbs. Removable, washable & custom sizable Interior AFX helmet liners & cheek pads are made with a hypoallergenic andanti-microbial nylon, most of which are removable &

Washable.

The size of this helmet is based on a combination of four factors: outer shell size, inner EPS thickness, comfort liner thickness & cheek pad thickness. The fit of the helmet can be customized by replacing your existing cheek pads with thinner cheek pads (for a looser fit) or thicker cheek pads (for a tighter fit). The fit can also be customized by replacing your existing comfort liner with a thinner comfort liner (for a looser fit) or thicker comfort liner (for a tighter fit). Please refer to the shell, liner & cheek pad compatibility chart below. Keep in mind these components can only be r...



...

Features This helmet model meets or exceeds ECE 22.05 motorcycle helmet safety standards Retention system is D-Ring A clear coat finish to protect paint & graphics A youth large-size FX-142Y weighs 1.10kg or 2.20 lbs. Removable, washable & custom sizable Interior AFX helmet liners & cheek pads are made with a hypoallergenic andanti-microbial nylon, most of which are removable &

Washable.

The size of this helmet is based on a combination of four factors: outer shell size, inner EPS thickness, comfort liner thickness & cheek pad thickness. The fit of the helmet can be customized by replacing your existing cheek pads with thinner cheek pads (for a looser fit) or thicker cheek pads (for a tighter fit). The fit can also be customized by replacing your existing comfort liner with a thinner comfort liner (for a looser fit) or thicker comfort liner (for a tighter fit). Please refer to the shell, liner & cheek pad compatibility chart below. Keep in mind these components can only be replaced inside the group of sizes contained in each size range block. Helmet Shell & EPS Size YS-YL YS YM YL Check Pad Thickness (mm) 30 30 30 Comfort Liner Thickness (mm) 18 15 12 Note Please note that as long as nothing else is written in the article description, all helmets that have a visor as standard will be delivered with a clear one, even if it is shown differently.



...