The sunscreen fits on the helmet model AFX FX-111. * Example image ...

Features This AFX FX-111DS helmet model meets or exceeds both ECE 22.05 & DOT FMVSS-218 motorcycle helmet safety standards 2 shell sizes 2 EPS sizes Microlock (quick release) retention system Provides ample ear cavity space for most speaker systems 3 tinted shields available for this model A clear coat finish to protect paint & graphics A large-size FX-111 weighs 1.60kg or 3.50 lbs. Außenschale Aerodynamic shell design constructed using an advanced ultra light weight poly-alloy for light weight & strength Chin bar Cam pivot, chin bar linkage system with latches for ease of movement & security Visor A flush-fit, sidecover-less face shield that is optically correct, compound-curved, scratch-resistant Quick release shield ratchet system Flip down inner smoke shield with easy to use side actuation lever Ventilation 4 points of aerodynamically designed flush fit ventilation with chin, top (left & right) & unique rear exhaust vents 3 intake vents & 1 exhaust vents Interior AFX h... ...

Features This AFX FX-111DS helmet model meets or exceeds both ECE 22.05 & DOT FMVSS-218 motorcycle helmet safety standards 2 shell sizes 2 EPS sizes Microlock (quick release) retention system Provides ample ear cavity space for most speaker systems 3 tinted shields available for this model A clear coat finish to protect paint & graphics A large-size FX-111 weighs 1.60kg or 3.50 lbs. Außenschale Aerodynamic shell design constructed using an advanced ultra light weight poly-alloy for light weight & strength Chin bar Cam pivot, chin bar linkage system with latches for ease of movement & security Visor A flush-fit, sidecover-less face shield that is optically correct, compound-curved, scratch-resistant Quick release shield ratchet system Flip down inner smoke shield with easy to use side actuation lever Ventilation 4 points of aerodynamically designed flush fit ventilation with chin, top (left & right) & unique rear exhaust vents 3 intake vents & 1 exhaust vents Interior AFX helmet liners & cheek pads are made with a hypoallergenic & anti-microbial nylon, most of which are removable & washable The size of this helmet is based on a combination of four factors: outer shell size, inner EPS thickness, comfort liner thickness & cheek pad thickness. The fit of the helmet can be customized by replacing your existing cheek pads with thinner cheek pads (for a looser fit) or thicker cheek pads (for a tighter fit). The fit can also be customized by replacing your existing comfort liner with a thinner comfort liner (for a looser fit) or thicker comfort liner (for a tighter fit). Note Please be aware, as long as nothing else is written in the item description: All helmets will be delivered only with the ECE certification by default all helmets that have a visor will be delivered with a clear visor, even if it is shown differently. ...

Replacement cheek pads for AFX helmets Suitable for AFX FX-14 *example picture ...

Replacement cheek pads for AFX helmets Suitable for AFX FX-14 *example picture ...

Shell design An aerodynamic shell design constructed using an advanced lightweight composite poly-alloy Cut out on shell sides to accommodate most neck brace designs A clear coat finish to protect paint & graphics Ventilation 11 points of ventilation with chin, side, forehead, top & rear vent 7 intake vents & 4 exhaust vents to maximize negative pressure suction Goggle guide on eyeport trim Goggle strap grabbers Peak A removable & adjustable (30 mm) screw-on visor Emergency quick release system It is a mechanism for trained emergency personnel to safely remove the cheek pads from the helmet while the helmet is still on the rider’s head Ear pocket Easy access ear pocket sized to fit all popular com systems Retention system Race approved Double D-Ring Weight A large-size FX-14 weighs 1.36kg or 3.00 lbs Certification This helmet model meets or exceeds both ECE 22.05 & DOT FMVSS-218 motorcycle helmet safety standards Removable, washable & custom sizeable interior The size of this helmet is based on a combination of four factors: outer shell size, inner EPS thickness, comfort liner thickness & cheek pad thickness. The fit of the helmet can be customized by replacing your existing cheek pads with thinner cheek pads (for a looser fit) or thicker cheek pads (for a tighter fit). The fit can also be customized by replacing your existing comfort liner with a thinner comfort liner (for a looser fit) or thicker comfort liner (for a tighter fit). Please refer to the shell, liner & cheek pad compatibility chart below. Keep in mind these components can only be replaced inside the group of sizes contained in each size range block. Shell & EPS Size XXS/XS/S M L/XL/XXL XXS XS S M L XL XXL Cheek pads (mm) 25 22 19 22 19 16 14 Confort-Liner (mm) 21 18 15 15 12 9 6 Note Please be aware, as long as nothing else is written in the item description: All helmets will be delivered only with the ECE certification by default ...

Shell design An aerodynamic shell design constructed using an advanced lightweight composite poly-alloy Cut out on shell sides to accommodate most neck brace designs A clear coat finish to protect paint & graphics Ventilation 11 points of ventilation with chin, side, forehead, top & rear vent 7 intake vents & 4 exhaust vents to maximize negative pressure suction Goggle guide on eyeport trim Goggle strap grabbers Peak A removable & adjustable (30 mm) screw-on visor Emergency quick release system It is a mechanism for trained emergency personnel to safely remove the cheek pads from the helmet while the helmet is still on the rider’s head Ear pocket Easy access ear pocket sized to fit all popular com systems Retention system Race approved Double D-Ring Weight A large-size FX-14 weighs 1.36kg or 3.00 lbs Certification This helmet model meets or exceeds both ECE 22.05 & DOT FMVSS-218 motorcycle helmet safety standards Removable, washable & custom sizeable interior The size of this helmet is based on a combination of four factors: outer shell size, inner EPS thickness, comfort liner thickness & cheek pad thickness. The fit of the helmet can be customized by replacing your existing cheek pads with thinner cheek pads (for a looser fit) or thicker cheek pads (for a tighter fit). The fit can also be customized by replacing your existing comfort liner with a thinner comfort liner (for a looser fit) or thicker comfort liner (for a tighter fit). Please refer to the shell, liner & cheek pad compatibility chart below. Keep in mind these components can only be replaced inside the group of sizes contained in each size range block. Shell & EPS Size XXS/XS/S M L/XL/XXL XXS XS S M L XL XXL Cheek pads (mm) 25 22 19 22 19 16 14 Confort-Liner (mm) 21 18 15 15 12 9 6 Note Please be aware, as long as nothing else is written in the item description: All helmets will be delivered only with the ECE certification by default ...

Shell design An aerodynamic shell design constructed using an advanced lightweight composite poly-alloy Cut out on shell sides to accommodate most neck brace designs A clear coat finish to protect paint & graphics Ventilation 11 points of ventilation with chin, side, forehead, top & rear vent 7 intake vents & 4 exhaust vents to maximize negative pressure suction Goggle guide on eyeport trim Goggle strap grabbers Peak A removable & adjustable (30 mm) screw-on visor Emergency quick release system It is a mechanism for trained emergency personnel to safely remove the cheek pads from the helmet while the helmet is still on the rider’s head Ear pocket Easy access ear pocket sized to fit all popular com systems Retention system Race approved Double D-Ring Weight A large-size FX-14 weighs 1.36kg or 3.00 lbs Certification This helmet model meets or exceeds both ECE 22.05 & DOT FMVSS-218 motorcycle helmet safety standards Removable, washable & custom sizeable interior The size of this helmet is based on a combination of four factors: outer shell size, inner EPS thickness, comfort liner thickness & cheek pad thickness. The fit of the helmet can be customized by replacing your existing cheek pads with thinner cheek pads (for a looser fit) or thicker cheek pads (for a tighter fit). The fit can also be customized by replacing your existing comfort liner with a thinner comfort liner (for a looser fit) or thicker comfort liner (for a tighter fit). Please refer to the shell, liner & cheek pad compatibility chart below. Keep in mind these components can only be replaced inside the group of sizes contained in each size range block. Shell & EPS Size XXS/XS/S M L/XL/XXL XXS XS S M L XL XXL Cheek pads (mm) 25 22 19 22 19 16 14 Confort-Liner (mm) 21 18 15 15 12 9 6 Note Please be aware, as long as nothing else is written in the item description: All helmets will be delivered only with the ECE certification by default ...

Shell design An aerodynamic shell design constructed using an advanced lightweight composite poly-alloy Cut out on shell sides to accommodate most neck brace designs A clear coat finish to protect paint & graphics Ventilation 11 points of ventilation with chin, side, forehead, top & rear vent 7 intake vents & 4 exhaust vents to maximize negative pressure suction Goggle guide on eyeport trim Goggle strap grabbers Peak A removable & adjustable (30 mm) screw-on visor Emergency quick release system It is a mechanism for trained emergency personnel to safely remove the cheek pads from the helmet while the helmet is still on the rider’s head Ear pocket Easy access ear pocket sized to fit all popular com systems Retention system Race approved Double D-Ring Weight A large-size FX-14 weighs 1.36kg or 3.00 lbs Certification This helmet model meets or exceeds both ECE 22.05 & DOT FMVSS-218 motorcycle helmet safety standards Removable, washable & custom sizeable interior The size of this helmet is based on a combination of four factors: outer shell size, inner EPS thickness, comfort liner thickness & cheek pad thickness. The fit of the helmet can be customized by replacing your existing cheek pads with thinner cheek pads (for a looser fit) or thicker cheek pads (for a tighter fit). The fit can also be customized by replacing your existing comfort liner with a thinner comfort liner (for a looser fit) or thicker comfort liner (for a tighter fit). Please refer to the shell, liner & cheek pad compatibility chart below. Keep in mind these components can only be replaced inside the group of sizes contained in each size range block. Shell & EPS Size XXS/XS/S M L/XL/XXL XXS XS S M L XL XXL Cheek pads (mm) 25 22 19 22 19 16 14 Confort-Liner (mm) 21 18 15 15 12 9 6 Note Please be aware, as long as nothing else is written in the item description: All helmets will be delivered only with the ECE certification by default ...

Shell design An aerodynamic shell design constructed using an advanced lightweight composite poly-alloy Cut out on shell sides to accommodate most neck brace designs A clear coat finish to protect paint & graphics Ventilation 11 points of ventilation with chin, side, forehead, top & rear vent 7 intake vents & 4 exhaust vents to maximize negative pressure suction Goggle guide on eyeport trim Goggle strap grabbers Peak A removable & adjustable (30 mm) screw-on visor Emergency quick release system It is a mechanism for trained emergency personnel to safely remove the cheek pads from the helmet while the helmet is still on the rider’s head Ear pocket Easy access ear pocket sized to fit all popular com systems Retention system Race approved Double D-Ring Weight A large-size FX-14 weighs 1.36kg or 3.00 lbs Certification This helmet model meets or exceeds both ECE 22.05 & DOT FMVSS-218 motorcycle helmet safety standards Removable, washable & custom sizeable interior The size of this helmet is based on a combination of four factors: outer shell size, inner EPS thickness, comfort liner thickness & cheek pad thickness. The fit of the helmet can be customized by replacing your existing cheek pads with thinner cheek pads (for a looser fit) or thicker cheek pads (for a tighter fit). The fit can also be customized by replacing your existing comfort liner with a thinner comfort liner (for a looser fit) or thicker comfort liner (for a tighter fit). Please refer to the shell, liner & cheek pad compatibility chart below. Keep in mind these components can only be replaced inside the group of sizes contained in each size range block. Shell & EPS Size XXS/XS/S M L/XL/XXL XXS XS S M L XL XXL Cheek pads (mm) 25 22 19 22 19 16 14 Confort-Liner (mm) 21 18 15 15 12 9 6 Note Please be aware, as long as nothing else is written in the item description: All helmets will be delivered only with the ECE certification by default ...