Engineered to perform, built to last & to protect, the long-cuffed Quantum 2 gloves have been designed to look great with any one-piece suits or sport jackets in the REV IT! Quantum collection. Race-spec knuckles, finger, palm, & cuff protection & sliders, are just a few incorporated features. Supple yet strong drum dyed goatskin & cowhide leather & stretch panels protect hands & allow for freedom of movement. An adjustment strap at the wrist & an adjustment tab at the cuff ensure the Quantum 2 gloves stay secure while riding. Features Adjustment strap at wrist
- The hook-&-loop adjustment strap at the wrist allows for optimum adjustability & fit when using our gloves. Find the ideal tightness & comfort every time it is used. Adjustment tab at cuff Stretch lips at fingers Long cuff Hook-&-loop closure Grip patch at palm
- A grip patch is made with a texturized pattern to deliver a superb grip performance. Outside stitching
- The PWR yarn stitching is positioned on the outside of the glove, eliminating any potential pressure points at the seams, & giving these gloves the ultimate sensitivity every racer demands. Ventilation holes These gloves are certified according to the EN 13594 Standard, published in 2015 & have achieved level 1 KP rating. Outer garment 3D air mesh
- This knitted fabric has an open, 3-dimensional structure that ensures good ventilation while riding. 3D air mesh is a must-have for long touring riders. Cowhide
- Cowhide has been used in this garment for optimal fit & protection. Goatskin
- Tanned leather made from goatskin is considered extremely durable, & is often used for gloves & other products that require a soft hide. Perforated PU coated fabric PU (polyurethane) coated fabric Lining Tri-fleece liner
- This polyester tricot fabric is used for glove lining, & brushed to provide extra warmth without adding any bulk. The lining wicks moisture away, to prevent hands from getting damp. Protection Outseam stitching by Guterman
- Marketing calls it PWR yarn Temperfoam® finger knuckles
- The self-contouring foam is used in areas where mobility & fit are a must, like the finger knuckles. Temperfoam® comes in a solid version as well as a perforated version. TPU hard shell finger knuckles
- Thermoplastic Urethane (TPU) is a highly durable synthetic material, used in many REV’IT! products for protection & waterproofing. TPU hard shell knuckle TPU hard shell little finger protector TPU hard shell palm slider
- Palm slider made from a durable & high abrasion resistant TPU material at the palm side of the glove. The palm slider makes sure that the glove slides in case the palm of the hand comes in contact with the asphalt. The abrasion resistance of gloves equipped with these sliders is greatly increased, thus reducing the risk of injury significantly. TPU hard shell thumb protector TPU cuff protector
- We use Thermoplastic Urethane (TPU)
- a highly durable synthetic material – at the cuff of these gloves to add additional impact protection & to optimize sliding in the event of a mishap. Ventilated dual comp protector
- The dual-comp protector consists of a 3D, pre-shaped honeycomb structure of TPU material, topped by an aluminum high-impact shield, for ultimate sliding. This lightweight hard part increases the level of protection significantly, without adding the considerable weight of traditional plastic hard parts. The dual comp protectors have been perforated to allow airflow to enter the gloves keeping your hands cool & comfortable.













...

Engineered to perform, built to last & to protect, the long-cuffed Quantum 2 gloves have been designed to look great with any one-piece suits or sport jackets in the REV IT! Quantum collection. Race-spec knuckles, finger, palm, & cuff protection & sliders, are just a few incorporated features. Supple yet strong drum dyed goatskin & cowhide leather & stretch panels protect hands & allow for freedom of movement. An adjustment strap at the wrist & an adjustment tab at the cuff ensure the Quantum 2 gloves stay secure while riding. Features Adjustment strap at wrist
- The hook-&-loop adjustment strap at the wrist allows for optimum adjustability & fit when using our gloves. Find the ideal tightness & comfort every time it is used. Adjustment tab at cuff Stretch lips at fingers Long cuff Hook-&-loop closure Grip patch at palm
- A grip patch is made with a texturized pattern to deliver a superb grip performance. Outside stitching
- The PWR yarn stitching is positioned on the outside of the glove, eliminating any potential pressure points at the seams, & giving these gloves the ultimate sensitivity every racer demands. Ventilation holes These gloves are certified according to the EN 13594 Standard, published in 2015 & have achieved level 1 KP rating. Outer garment 3D air mesh
- This knitted fabric has an open, 3-dimensional structure that ensures good ventilation while riding. 3D air mesh is a must-have for long touring riders. Cowhide
- Cowhide has been used in this garment for optimal fit & protection. Goatskin
- Tanned leather made from goatskin is considered extremely durable, & is often used for gloves & other products that require a soft hide. Perforated PU coated fabric PU (polyurethane) coated fabric Lining Tri-fleece liner
- This polyester tricot fabric is used for glove lining, & brushed to provide extra warmth without adding any bulk. The lining wicks moisture away, to prevent hands from getting damp. Protection Outseam stitching by Guterman
- Marketing calls it PWR yarn Temperfoam® finger knuckles
- The self-contouring foam is used in areas where mobility & fit are a must, like the finger knuckles. Temperfoam® comes in a solid version as well as a perforated version. TPU hard shell finger knuckles
- Thermoplastic Urethane (TPU) is a highly durable synthetic material, used in many REV’IT! products for protection & waterproofing. TPU hard shell knuckle TPU hard shell little finger protector TPU hard shell palm slider
- Palm slider made from a durable & high abrasion resistant TPU material at the palm side of the glove. The palm slider makes sure that the glove slides in case the palm of the hand comes in contact with the asphalt. The abrasion resistance of gloves equipped with these sliders is greatly increased, thus reducing the risk of injury significantly. TPU hard shell thumb protector TPU cuff protector
- We use Thermoplastic Urethane (TPU)
- a highly durable synthetic material – at the cuff of these gloves to add additional impact protection & to optimize sliding in the event of a mishap. Ventilated dual comp protector
- The dual-comp protector consists of a 3D, pre-shaped honeycomb structure of TPU material, topped by an aluminum high-impact shield, for ultimate sliding. This lightweight hard part increases the level of protection significantly, without adding the considerable weight of traditional plastic hard parts. The dual comp protectors have been perforated to allow airflow to enter the gloves keeping your hands cool & comfortable.













...

Engineered to perform, built to last & to protect, the long-cuffed Quantum 2 gloves have been designed to look great with any one-piece suits or sport jackets in the REV IT! Quantum collection. Race-spec knuckles, finger, palm, & cuff protection & sliders, are just a few incorporated features. Supple yet strong drum dyed goatskin & cowhide leather & stretch panels protect hands & allow for freedom of movement. An adjustment strap at the wrist & an adjustment tab at the cuff ensure the Quantum 2 gloves stay secure while riding. Features Adjustment strap at wrist
- The hook-&-loop adjustment strap at the wrist allows for optimum adjustability & fit when using our gloves. Find the ideal tightness & comfort every time it is used. Adjustment tab at cuff Stretch lips at fingers Long cuff Hook-&-loop closure Grip patch at palm
- A grip patch is made with a texturized pattern to deliver a superb grip performance. Outside stitching
- The PWR yarn stitching is positioned on the outside of the glove, eliminating any potential pressure points at the seams, & giving these gloves the ultimate sensitivity every racer demands. Ventilation holes These gloves are certified according to the EN 13594 Standard, published in 2015 & have achieved level 1 KP rating. Outer garment 3D air mesh
- This knitted fabric has an open, 3-dimensional structure that ensures good ventilation while riding. 3D air mesh is a must-have for long touring riders. Cowhide
- Cowhide has been used in this garment for optimal fit & protection. Goatskin
- Tanned leather made from goatskin is considered extremely durable, & is often used for gloves & other products that require a soft hide. Perforated PU coated fabric PU (polyurethane) coated fabric Lining Tri-fleece liner
- This polyester tricot fabric is used for glove lining, & brushed to provide extra warmth without adding any bulk. The lining wicks moisture away, to prevent hands from getting damp. Protection Outseam stitching by Guterman
- Marketing calls it PWR yarn Temperfoam® finger knuckles
- The self-contouring foam is used in areas where mobility & fit are a must, like the finger knuckles. Temperfoam® comes in a solid version as well as a perforated version. TPU hard shell finger knuckles
- Thermoplastic Urethane (TPU) is a highly durable synthetic material, used in many REV’IT! products for protection & waterproofing. TPU hard shell knuckle TPU hard shell little finger protector TPU hard shell palm slider
- Palm slider made from a durable & high abrasion resistant TPU material at the palm side of the glove. The palm slider makes sure that the glove slides in case the palm of the hand comes in contact with the asphalt. The abrasion resistance of gloves equipped with these sliders is greatly increased, thus reducing the risk of injury significantly. TPU hard shell thumb protector TPU cuff protector
- We use Thermoplastic Urethane (TPU)
- a highly durable synthetic material – at the cuff of these gloves to add additional impact protection & to optimize sliding in the event of a mishap. Ventilated dual comp protector
- The dual-comp protector consists of a 3D, pre-shaped honeycomb structure of TPU material, topped by an aluminum high-impact shield, for ultimate sliding. This lightweight hard part increases the level of protection significantly, without adding the considerable weight of traditional plastic hard parts. The dual comp protectors have been perforated to allow airflow to enter the gloves keeping your hands cool & comfortable.













...

Engineered to perform, built to last & to protect, the long-cuffed Quantum 2 gloves have been designed to look great with any one-piece suits or sport jackets in the REV IT! Quantum collection. Race-spec knuckles, finger, palm, & cuff protection & sliders, are just a few incorporated features. Supple yet strong drum dyed goatskin & cowhide leather & stretch panels protect hands & allow for freedom of movement. An adjustment strap at the wrist & an adjustment tab at the cuff ensure the Quantum 2 gloves stay secure while riding. Features Adjustment strap at wrist
- The hook-&-loop adjustment strap at the wrist allows for optimum adjustability & fit when using our gloves. Find the ideal tightness & comfort every time it is used. Adjustment tab at cuff Stretch lips at fingers Long cuff Hook-&-loop closure Grip patch at palm
- A grip patch is made with a texturized pattern to deliver a superb grip performance. Outside stitching
- The PWR yarn stitching is positioned on the outside of the glove, eliminating any potential pressure points at the seams, & giving these gloves the ultimate sensitivity every racer demands. Ventilation holes These gloves are certified according to the EN 13594 Standard, published in 2015 & have achieved level 1 KP rating. Outer garment 3D air mesh
- This knitted fabric has an open, 3-dimensional structure that ensures good ventilation while riding. 3D air mesh is a must-have for long touring riders. Cowhide
- Cowhide has been used in this garment for optimal fit & protection. Goatskin
- Tanned leather made from goatskin is considered extremely durable, & is often used for gloves & other products that require a soft hide. Perforated PU coated fabric PU (polyurethane) coated fabric Lining Tri-fleece liner
- This polyester tricot fabric is used for glove lining, & brushed to provide extra warmth without adding any bulk. The lining wicks moisture away, to prevent hands from getting damp. Protection Outseam stitching by Guterman
- Marketing calls it PWR yarn Temperfoam® finger knuckles
- The self-contouring foam is used in areas where mobility & fit are a must, like the finger knuckles. Temperfoam® comes in a solid version as well as a perforated version. TPU hard shell finger knuckles
- Thermoplastic Urethane (TPU) is a highly durable synthetic material, used in many REV’IT! products for protection & waterproofing. TPU hard shell knuckle TPU hard shell little finger protector TPU hard shell palm slider
- Palm slider made from a durable & high abrasion resistant TPU material at the palm side of the glove. The palm slider makes sure that the glove slides in case the palm of the hand comes in contact with the asphalt. The abrasion resistance of gloves equipped with these sliders is greatly increased, thus reducing the risk of injury significantly. TPU hard shell thumb protector TPU cuff protector
- We use Thermoplastic Urethane (TPU)
- a highly durable synthetic material – at the cuff of these gloves to add additional impact protection & to optimize sliding in the event of a mishap. Ventilated dual comp protector
- The dual-comp protector consists of a 3D, pre-shaped honeycomb structure of TPU material, topped by an aluminum high-impact shield, for ultimate sliding. This lightweight hard part increases the level of protection significantly, without adding the considerable weight of traditional plastic hard parts. The dual comp protectors have been perforated to allow airflow to enter the gloves keeping your hands cool & comfortable.













...

Engineered to perform, built to last & to protect, the long-cuffed Quantum 2 gloves have been designed to look great with any one-piece suits or sport jackets in the REV IT! Quantum collection. Race-spec knuckles, finger, palm, & cuff protection & sliders, are just a few incorporated features. Supple yet strong drum dyed goatskin & cowhide leather & stretch panels protect hands & allow for freedom of movement. An adjustment strap at the wrist & an adjustment tab at the cuff ensure the Quantum 2 gloves stay secure while riding. Features Adjustment strap at wrist
- The hook-&-loop adjustment strap at the wrist allows for optimum adjustability & fit when using our gloves. Find the ideal tightness & comfort every time it is used. Adjustment tab at cuff Stretch lips at fingers Long cuff Hook-&-loop closure Grip patch at palm
- A grip patch is made with a texturized pattern to deliver a superb grip performance. Outside stitching
- The PWR yarn stitching is positioned on the outside of the glove, eliminating any potential pressure points at the seams, & giving these gloves the ultimate sensitivity every racer demands. Ventilation holes These gloves are certified according to the EN 13594 Standard, published in 2015 & have achieved level 1 KP rating. Outer garment 3D air mesh
- This knitted fabric has an open, 3-dimensional structure that ensures good ventilation while riding. 3D air mesh is a must-have for long touring riders. Cowhide
- Cowhide has been used in this garment for optimal fit & protection. Goatskin
- Tanned leather made from goatskin is considered extremely durable, & is often used for gloves & other products that require a soft hide. Perforated PU coated fabric PU (polyurethane) coated fabric Lining Tri-fleece liner
- This polyester tricot fabric is used for glove lining, & brushed to provide extra warmth without adding any bulk. The lining wicks moisture away, to prevent hands from getting damp. Protection Outseam stitching by Guterman
- Marketing calls it PWR yarn Temperfoam® finger knuckles
- The self-contouring foam is used in areas where mobility & fit are a must, like the finger knuckles. Temperfoam® comes in a solid version as well as a perforated version. TPU hard shell finger knuckles
- Thermoplastic Urethane (TPU) is a highly durable synthetic material, used in many REV’IT! products for protection & waterproofing. TPU hard shell knuckle TPU hard shell little finger protector TPU hard shell palm slider
- Palm slider made from a durable & high abrasion resistant TPU material at the palm side of the glove. The palm slider makes sure that the glove slides in case the palm of the hand comes in contact with the asphalt. The abrasion resistance of gloves equipped with these sliders is greatly increased, thus reducing the risk of injury significantly. TPU hard shell thumb protector TPU cuff protector
- We use Thermoplastic Urethane (TPU)
- a highly durable synthetic material – at the cuff of these gloves to add additional impact protection & to optimize sliding in the event of a mishap. Ventilated dual comp protector
- The dual-comp protector consists of a 3D, pre-shaped honeycomb structure of TPU material, topped by an aluminum high-impact shield, for ultimate sliding. This lightweight hard part increases the level of protection significantly, without adding the considerable weight of traditional plastic hard parts. The dual comp protectors have been perforated to allow airflow to enter the gloves keeping your hands cool & comfortable.













...

The Quantum 2 leather jacket is for the sport enthusiast who doesn ’t want to blend in the crowd. Behind the colorful graphics & outspoken design, the Quantum 2 features high-quality components that riders have come to expect. Those include: single-layer neoprene cuffs
- making it easier to get your gloves over the jacket cuffs
- a neoprene comfort collar, a moisture-managing mesh summer lining, a removable insulated body warmer, TPU sliding parts at the elbows (replaceable) & shoulders &, to complete the package, Moto GP-spec impact protectors. Mix it with a pair of technical riding jeans & sneakers, or zip them into a pair of leather pants. Features Race fit Adjustment strap at waist Inner pocket Inner napoleon pocket Slit pocket at waist Jeans loop
- The loop at the back of this jacket enables you to attach it to your jeans, which prevents the jacket from creeping up: no more exposed back when riding your bike. Long connection zipper Short connection zipper Stretch at armholes Stretch at inside arms Stretch at shoulders Stretch lips at elbows Air inlet on shoulders This garment is certified according to the Fpr EN 17092 Standard, published in 2019 & has achieved AAA rating. Outer garment 3D Air Mesh
- This knitted fabric has an open, 3-dimensional structure that ensures good ventilation while riding. 3D Air Mesh is a must-have for long touring riders. Artificial Leather
- A sythetic version of leather with a similar look. PWR Shell Stretch Neoprene
- Neoprene is a synthetic rubber useful for protective gear. It is abrasion-resistant, chemical-resistant, waterproof, somewhat stretchable, & buoyant. Monaco performance cowhide
- The top-spec Monaco performance cowhide has been used in this product. Insulation Detachable thermal body warmer Protection Dual comp shoulder protectors Prepared for SEESOFT™ Level 1 Divided Insert Chest Protector DC-L1-B
- The protector pocket in this REV IT! garment is tailor-made to accommodate the Divided Chest Protector SEESOFT™ Level 1
- an easy upgrade to maximize safety. Prepared for SEESOFT™ Level 2 Insert Back Protector TYPE RV
- The back protector pocket in this REV IT! garment is tailor-made to accommodate the SEESOFT™ Level 2 back protector insert Type RV
- an easy upgrade to maximize safety. Safety seams
- The stitching in motorcycle garments contributes greatly to the abrasion resistance of the total gear. This is why REV IT! uses safety seams on garment areas at increased risk of impact. Safety seams have a visible as well as an invisible seam. This construction keeps the material of the outer shell together, even when the visible seam is thorn. SEEFLEX™ Level 2 Elbow Protectors RV10-L2-B
- Certified Level 2 according to the new norm EN1621-1:2012 the SEEFLEX™ protector is the latest innovation from the in-house R&D department. The new norm also tests the impact levels in various temperature ranges. The SEEFLEX™ protectors easily surpass the new norm without sacrificing wearer comfort. SEEFLEX™ Level 2 Shoulder Protectors RV13-L2-B TPU elbow sliders












...

The Quantum 2 leather jacket is for the sport enthusiast who doesn ’t want to blend in the crowd. Behind the colorful graphics & outspoken design, the Quantum 2 features high-quality components that riders have come to expect. Those include: single-layer neoprene cuffs
- making it easier to get your gloves over the jacket cuffs
- a neoprene comfort collar, a moisture-managing mesh summer lining, a removable insulated body warmer, TPU sliding parts at the elbows (replaceable) & shoulders &, to complete the package, Moto GP-spec impact protectors. Mix it with a pair of technical riding jeans & sneakers, or zip them into a pair of leather pants. Features Race fit Adjustment strap at waist Inner pocket Inner napoleon pocket Slit pocket at waist Jeans loop
- The loop at the back of this jacket enables you to attach it to your jeans, which prevents the jacket from creeping up: no more exposed back when riding your bike. Long connection zipper Short connection zipper Stretch at armholes Stretch at inside arms Stretch at shoulders Stretch lips at elbows Air inlet on shoulders This garment is certified according to the Fpr EN 17092 Standard, published in 2019 & has achieved AAA rating. Outer garment 3D Air Mesh
- This knitted fabric has an open, 3-dimensional structure that ensures good ventilation while riding. 3D Air Mesh is a must-have for long touring riders. Artificial Leather
- A sythetic version of leather with a similar look. PWR Shell Stretch Neoprene
- Neoprene is a synthetic rubber useful for protective gear. It is abrasion-resistant, chemical-resistant, waterproof, somewhat stretchable, & buoyant. Monaco performance cowhide
- The top-spec Monaco performance cowhide has been used in this product. Insulation Detachable thermal body warmer Protection Dual comp shoulder protectors Prepared for SEESOFT™ Level 1 Divided Insert Chest Protector DC-L1-B
- The protector pocket in this REV IT! garment is tailor-made to accommodate the Divided Chest Protector SEESOFT™ Level 1
- an easy upgrade to maximize safety. Prepared for SEESOFT™ Level 2 Insert Back Protector TYPE RV
- The back protector pocket in this REV IT! garment is tailor-made to accommodate the SEESOFT™ Level 2 back protector insert Type RV
- an easy upgrade to maximize safety. Safety seams
- The stitching in motorcycle garments contributes greatly to the abrasion resistance of the total gear. This is why REV IT! uses safety seams on garment areas at increased risk of impact. Safety seams have a visible as well as an invisible seam. This construction keeps the material of the outer shell together, even when the visible seam is thorn. SEEFLEX™ Level 2 Elbow Protectors RV10-L2-B
- Certified Level 2 according to the new norm EN1621-1:2012 the SEEFLEX™ protector is the latest innovation from the in-house R&D department. The new norm also tests the impact levels in various temperature ranges. The SEEFLEX™ protectors easily surpass the new norm without sacrificing wearer comfort. SEEFLEX™ Level 2 Shoulder Protectors RV13-L2-B TPU elbow sliders












...

The Quantum 2 leather jacket is for the sport enthusiast who doesn ’t want to blend in the crowd. Behind the colorful graphics & outspoken design, the Quantum 2 features high-quality components that riders have come to expect. Those include: single-layer neoprene cuffs
- making it easier to get your gloves over the jacket cuffs
- a neoprene comfort collar, a moisture-managing mesh summer lining, a removable insulated body warmer, TPU sliding parts at the elbows (replaceable) & shoulders &, to complete the package, Moto GP-spec impact protectors. Mix it with a pair of technical riding jeans & sneakers, or zip them into a pair of leather pants. Features Race fit Adjustment strap at waist Inner pocket Inner napoleon pocket Slit pocket at waist Jeans loop
- The loop at the back of this jacket enables you to attach it to your jeans, which prevents the jacket from creeping up: no more exposed back when riding your bike. Long connection zipper Short connection zipper Stretch at armholes Stretch at inside arms Stretch at shoulders Stretch lips at elbows Air inlet on shoulders This garment is certified according to the Fpr EN 17092 Standard, published in 2019 & has achieved AAA rating. Outer garment 3D Air Mesh
- This knitted fabric has an open, 3-dimensional structure that ensures good ventilation while riding. 3D Air Mesh is a must-have for long touring riders. Artificial Leather
- A sythetic version of leather with a similar look. PWR Shell Stretch Neoprene
- Neoprene is a synthetic rubber useful for protective gear. It is abrasion-resistant, chemical-resistant, waterproof, somewhat stretchable, & buoyant. Monaco performance cowhide
- The top-spec Monaco performance cowhide has been used in this product. Insulation Detachable thermal body warmer Protection Dual comp shoulder protectors Prepared for SEESOFT™ Level 1 Divided Insert Chest Protector DC-L1-B
- The protector pocket in this REV IT! garment is tailor-made to accommodate the Divided Chest Protector SEESOFT™ Level 1
- an easy upgrade to maximize safety. Prepared for SEESOFT™ Level 2 Insert Back Protector TYPE RV
- The back protector pocket in this REV IT! garment is tailor-made to accommodate the SEESOFT™ Level 2 back protector insert Type RV
- an easy upgrade to maximize safety. Safety seams
- The stitching in motorcycle garments contributes greatly to the abrasion resistance of the total gear. This is why REV IT! uses safety seams on garment areas at increased risk of impact. Safety seams have a visible as well as an invisible seam. This construction keeps the material of the outer shell together, even when the visible seam is thorn. SEEFLEX™ Level 2 Elbow Protectors RV10-L2-B
- Certified Level 2 according to the new norm EN1621-1:2012 the SEEFLEX™ protector is the latest innovation from the in-house R&D department. The new norm also tests the impact levels in various temperature ranges. The SEEFLEX™ protectors easily surpass the new norm without sacrificing wearer comfort. SEEFLEX™ Level 2 Shoulder Protectors RV13-L2-B TPU elbow sliders












...

The Quantum 2 leather jacket is for the sport enthusiast who doesn ’t want to blend in the crowd. Behind the colorful graphics & outspoken design, the Quantum 2 features high-quality components that riders have come to expect. Those include: single-layer neoprene cuffs
- making it easier to get your gloves over the jacket cuffs
- a neoprene comfort collar, a moisture-managing mesh summer lining, a removable insulated body warmer, TPU sliding parts at the elbows (replaceable) & shoulders &, to complete the package, Moto GP-spec impact protectors. Mix it with a pair of technical riding jeans & sneakers, or zip them into a pair of leather pants. Features Race fit Adjustment strap at waist Inner pocket Inner napoleon pocket Slit pocket at waist Jeans loop
- The loop at the back of this jacket enables you to attach it to your jeans, which prevents the jacket from creeping up: no more exposed back when riding your bike. Long connection zipper Short connection zipper Stretch at armholes Stretch at inside arms Stretch at shoulders Stretch lips at elbows Air inlet on shoulders This garment is certified according to the Fpr EN 17092 Standard, published in 2019 & has achieved AAA rating. Outer garment 3D Air Mesh
- This knitted fabric has an open, 3-dimensional structure that ensures good ventilation while riding. 3D Air Mesh is a must-have for long touring riders. Artificial Leather
- A sythetic version of leather with a similar look. PWR Shell Stretch Neoprene
- Neoprene is a synthetic rubber useful for protective gear. It is abrasion-resistant, chemical-resistant, waterproof, somewhat stretchable, & buoyant. Monaco performance cowhide
- The top-spec Monaco performance cowhide has been used in this product. Insulation Detachable thermal body warmer Protection Dual comp shoulder protectors Prepared for SEESOFT™ Level 1 Divided Insert Chest Protector DC-L1-B
- The protector pocket in this REV IT! garment is tailor-made to accommodate the Divided Chest Protector SEESOFT™ Level 1
- an easy upgrade to maximize safety. Prepared for SEESOFT™ Level 2 Insert Back Protector TYPE RV
- The back protector pocket in this REV IT! garment is tailor-made to accommodate the SEESOFT™ Level 2 back protector insert Type RV
- an easy upgrade to maximize safety. Safety seams
- The stitching in motorcycle garments contributes greatly to the abrasion resistance of the total gear. This is why REV IT! uses safety seams on garment areas at increased risk of impact. Safety seams have a visible as well as an invisible seam. This construction keeps the material of the outer shell together, even when the visible seam is thorn. SEEFLEX™ Level 2 Elbow Protectors RV10-L2-B
- Certified Level 2 according to the new norm EN1621-1:2012 the SEEFLEX™ protector is the latest innovation from the in-house R&D department. The new norm also tests the impact levels in various temperature ranges. The SEEFLEX™ protectors easily surpass the new norm without sacrificing wearer comfort. SEEFLEX™ Level 2 Shoulder Protectors RV13-L2-B TPU elbow sliders












...

The Quantum 2 leather jacket is for the sport enthusiast who doesn ’t want to blend in the crowd. Behind the colorful graphics & outspoken design, the Quantum 2 features high-quality components that riders have come to expect. Those include: single-layer neoprene cuffs
- making it easier to get your gloves over the jacket cuffs
- a neoprene comfort collar, a moisture-managing mesh summer lining, a removable insulated body warmer, TPU sliding parts at the elbows (replaceable) & shoulders &, to complete the package, Moto GP-spec impact protectors. Mix it with a pair of technical riding jeans & sneakers, or zip them into a pair of leather pants. Features Race fit Adjustment strap at waist Inner pocket Inner napoleon pocket Slit pocket at waist Jeans loop
- The loop at the back of this jacket enables you to attach it to your jeans, which prevents the jacket from creeping up: no more exposed back when riding your bike. Long connection zipper Short connection zipper Stretch at armholes Stretch at inside arms Stretch at shoulders Stretch lips at elbows Air inlet on shoulders This garment is certified according to the Fpr EN 17092 Standard, published in 2019 & has achieved AAA rating. Outer garment 3D Air Mesh
- This knitted fabric has an open, 3-dimensional structure that ensures good ventilation while riding. 3D Air Mesh is a must-have for long touring riders. Artificial Leather
- A sythetic version of leather with a similar look. PWR Shell Stretch Neoprene
- Neoprene is a synthetic rubber useful for protective gear. It is abrasion-resistant, chemical-resistant, waterproof, somewhat stretchable, & buoyant. Monaco performance cowhide
- The top-spec Monaco performance cowhide has been used in this product. Insulation Detachable thermal body warmer Protection Dual comp shoulder protectors Prepared for SEESOFT™ Level 1 Divided Insert Chest Protector DC-L1-B
- The protector pocket in this REV IT! garment is tailor-made to accommodate the Divided Chest Protector SEESOFT™ Level 1
- an easy upgrade to maximize safety. Prepared for SEESOFT™ Level 2 Insert Back Protector TYPE RV
- The back protector pocket in this REV IT! garment is tailor-made to accommodate the SEESOFT™ Level 2 back protector insert Type RV
- an easy upgrade to maximize safety. Safety seams
- The stitching in motorcycle garments contributes greatly to the abrasion resistance of the total gear. This is why REV IT! uses safety seams on garment areas at increased risk of impact. Safety seams have a visible as well as an invisible seam. This construction keeps the material of the outer shell together, even when the visible seam is thorn. SEEFLEX™ Level 2 Elbow Protectors RV10-L2-B
- Certified Level 2 according to the new norm EN1621-1:2012 the SEEFLEX™ protector is the latest innovation from the in-house R&D department. The new norm also tests the impact levels in various temperature ranges. The SEEFLEX™ protectors easily surpass the new norm without sacrificing wearer comfort. SEEFLEX™ Level 2 Shoulder Protectors RV13-L2-B TPU elbow sliders












...