The LS2 Zoe City Boots, are available for men & women. Visually a mix of sneaker & sports shoe, thanks to comfort & safety perfect for everyday life & for trips in the city. Rubber sole, reinforcements on the toe & heel, cover the ankle & are made from flexible materials & elastic inserts that allow a better adaptation of the foot. Features Urban fit sneaker Stretch nylon fabric lining, fine quality leather 3D mesh lining for enhanced breathability Anti-slip heel made from micro suede leather LS2 cushioned comfort design Reinforced heel/ankle cups/toe box TPU protective padding Thick & flexible inner & outer layer for added comfort Lightweight rubber sole for enhanced grip Suitable for spring, autumn & winter Certified according to EN 13634:2017 Level-1222 ...
The LS2 Zoe City Boots, are available for men & women. Visually a mix of sneaker & sports shoe, thanks to comfort & safety perfect for everyday life & for trips in the city. Rubber sole, reinforcements on the toe & heel, cover the ankle & are made from flexible materials & elastic inserts that allow a better adaptation of the foot. Features Urban fit sneaker Stretch nylon fabric lining, fine quality leather 3D mesh lining for enhanced breathability Anti-slip heel made from micro suede leather LS2 cushioned comfort design Reinforced heel/ankle cups/toe box TPU protective padding Thick & flexible inner & outer layer for added comfort Lightweight rubber sole for enhanced grip Suitable for spring, autumn & winter Certified according to EN 13634:2017 Level-1222 ...
The LS2 Zoe City Boots, are available for men & women. Visually a mix of sneaker & sports shoe, thanks to comfort & safety perfect for everyday life & for trips in the city. Rubber sole, reinforcements on the toe & heel, cover the ankle & are made from flexible materials & elastic inserts that allow a better adaptation of the foot. Features Urban fit sneaker Stretch nylon fabric lining, fine quality leather 3D mesh lining for enhanced breathability Anti-slip heel made from micro suede leather LS2 cushioned comfort design Reinforced heel/ankle cups/toe box TPU protective padding Thick & flexible inner & outer layer for added comfort Lightweight rubber sole for enhanced grip Suitable for spring, autumn & winter Certified according to EN 13634:2017 Level-1222 ...
The LS2 Zoe City Boots, are available for men & women. Visually a mix of sneaker & sports shoe, thanks to comfort & safety perfect for everyday life & for trips in the city. Rubber sole, reinforcements on the toe & heel, cover the ankle & are made from flexible materials & elastic inserts that allow a better adaptation of the foot. Features Urban fit sneaker Stretch nylon fabric lining, fine quality leather 3D mesh lining for enhanced breathability Anti-slip heel made from micro suede leather LS2 cushioned comfort design Reinforced heel/ankle cups/toe box TPU protective padding Thick & flexible inner & outer layer for added comfort Lightweight rubber sole for enhanced grip Suitable for spring, autumn & winter Certified according to EN 13634:2017 Level-1222 ...
The LS2 Zoe City Boots, are available for men & women. Visually a mix of sneaker & sports shoe, thanks to comfort & safety perfect for everyday life & for trips in the city. Rubber sole, reinforcements on the toe & heel, cover the ankle & are made from flexible materials & elastic inserts that allow a better adaptation of the foot. Features Urban fit sneaker Stretch nylon fabric lining, fine quality leather 3D mesh lining for enhanced breathability Anti-slip heel made from micro suede leather LS2 cushioned comfort design Reinforced heel/ankle cups/toe box TPU protective padding Thick & flexible inner & outer layer for added comfort Lightweight rubber sole for enhanced grip Suitable for spring, autumn & winter Certified according to EN 13634:2017 Level-1222 ...
With this low aluminium handlebar the look & handling of the bike changes considerably. Due to the relatively low height & larger width, an aggressive look is created, which is especially desired for Streetfighter conversions. Features Depending on the model the handlebars have an ABE or TÜV certificate The surface of this shapely aluminium handlebar is high-quality anodised & available in the trendy colours silver, blue & titanium Due to the strong 5mm wall the handlebar is especially break-proof Bar ends must be matched to this wall An adjustment of cables, brake & clutch lines may be necessary due to the greater width of the handlebars depending on the model
Dimensions Width: 750 mm Height inside/outside: 53/110 mm Offset to the rear: 91 mm Width at clamp: up to 145 mm Outer diameter: 22 mm Inner diameter: 12 mm If the model is not listed in the supplied ABE, this is used as a TÜV certificate - an evaluation at the TÜV/ Dekra immediately after the installation is necessary to get the confirmation of the correct installation & thus the approval by individual acceptance. ...
With this low aluminium handlebar the look & handling of the bike changes considerably. Due to the relatively low height & larger width, an aggressive look is created, which is especially desired for Streetfighter conversions. Features Depending on the model the handlebars have an ABE or TÜV certificate The surface of this shapely aluminium handlebar is high-quality anodised & available in the trendy colours silver, blue & titanium Due to the strong 5mm wall the handlebar is especially break-proof Bar ends must be matched to this wall An adjustment of cables, brake & clutch lines may be necessary due to the greater width of the handlebars depending on the model
Dimensions Width: 750 mm Height inside/outside: 53/110 mm Offset to the rear: 91 mm Width at clamp: up to 145 mm Outer diameter: 22 mm Inner diameter: 12 mm If the model is not listed in the supplied ABE, this is used as a TÜV certificate - an evaluation at the TÜV/ Dekra immediately after the installation is necessary... ...
If the original handlebars are heavily corroded, broken by a crash or if you want to change the look, Lucas/TRW steel handlebars are the perfect choice. Features Homologation ABE for many vehicles, in many cases no more TÜV necessary! Large variety of types for nearly all applications on the road For a more comfortable seating position or a more aggressive look Steering tubes made from high-strength steel with 22 mm Ø & 3-fold coating Surface refinement exclusively with environmentally friendly processes High quality product " Made in Germany"
Dimensions Width: 810 mm Height: 83 mm Offset to the rear: 223 mm Width at clamp: 130 mm If the model is not listed in the supplied ABE, this is used as a TÜV certificate - an evaluation at the TÜV/ Dekra immediately after the installation is necessary to get the confirmation of the correct installation & thus the approval by individual acceptance. ...
If the original handlebars are heavily corroded, broken by a crash or if you want to change the look, Lucas/TRW steel handlebars are the perfect choice. Features Homologation ABE for many vehicles, in many cases no more TÜV necessary! Large variety of types for nearly all applications on the road For a more comfortable seating position or a more aggressive look Steering tubes made from high-strength steel with 22 mm Ø & 3-fold coating Surface refinement exclusively with environmentally friendly processes High quality product " Made in Germany"
Dimensions Width: 810 mm Height: 83 mm Offset to the rear: 223 mm Width at clamp: 130 mm If the model is not listed in the supplied ABE, this is used as a TÜV certificate - an evaluation at the TÜV/ Dekra immediately after the installation is necessary to get the confirmation of the correct installation & thus the approval by individual acceptance. ...
Available
Lucas Apehanger, Steel Steering Wheel
Features Steel handlebars with 25.4 mm (1 inch) with ABE no longer necessary TÜV! more Details Width: 930 mmHeight: 240 mmKröpfung below: 180 mmBasis to handle end 210 mmWidth base: 260 mmKröpfung back: 0mm
RIP - This product is no longer available on our network. It was last seen on 24.06.2022
This page now acts as a permanent archive for this product. Add more information using the comments box below to ensure it can still be found by future generations.
Use our search facility to see if it is available from an alternative contributor.
Features Steel handlebars with 25.4 mm (1 inch) with ABE no longer necessary TÜV! more Details Width: 930 mm Height: 240 mm Kröpfung below: 180 mm Basis to handle end 210 mm Width base: 260 mm Kröpfung back: 0mm
Reviews/Comments
Add New
Intelligent Comparison
Oooops! We couldn't find anything! Perhaps this product's unique.... Or perhaps we are still looking for comparisons! Click to bump this page and we'll hurry up.
Price History
Vouchers
No voucher codes found. Do you know a voucher code for this product or supplier? Add it to Insights for others to use.
Facebook
Jargon Buster
Steel - An alloy made predominately of Iron combined with <2% carbon
Inch - Equivalent to approximately 2.5cm
Width - The measurement of something from one side to the other.
Supplier Information
Motoin SE
Page Updated: 2025-02-05 20:08:21
Community Generated Product Tags
Oh No! The productWIKI community hasn't generated any tags for this product yet!