Features Mix of full Goat leather & Polyester Reinforcements in leather at palm and little finger Double wrist closure improving the level of protection & fitting Superfabric reinforcement at knuckles 3D air mesh panels at fingers Innerpalm & outerhand leather perforated for optimal ventilation Elastic wrist D3O® knuckle protection
The Track-R has been specially developed for the real trackday fanatics among us! The glove is completely derived from the racing gloves that Macna uses in the MotoGP and WorldSBK. In cooperation with drivers, the safety level of the glove has been raised to a higher level! The glove is packed with features to protect your hands and wrists as soon as you make a low or highsider, but they are still flexible enough to feel the clip-ons. This means you always have the engine in optimal control! Safety These are gloves with Kevlar reinforcement, Superfabric on the fingers and palm and R.I.S.C. knuckle, finger, palm and wrist protector! In addition, the glove is made of different materials such as goat, beef and kangaroo leather for extra abrasion resistance, weight saving and flexibility. Features Made from goatskin, cow leather and kangaroo leather Kevlar lining with inverted Bemberg for extra safety and comfort R.I.S.C. knuckle, finger, palm and wrist protector Superfabric on fingers and palm offers extra protection with a glide Pinkie is fixed to ring finger Ergonomic thumb, the leather of thumb and forefinger consist of a whole for more comfort 30º buckle, more freedom of movement at the wrist
Features Short neoprene cuff Wrist with elastic and large tension strap Stretch fabric on the backhand Padded reinforcement on the palm of the lower hand Material Waterproof and breathable with integrated membrane Safety Model Flexible and integrated ankle protection on the backhand Padded reinforcement on the palm of the lower hand
Features Short cuff in neoprene with strap Thin glued jersey lining on backhand Perforated mesh fabric Supple, integrated knuckle protector on backhand Palm reinforced
Features Short neoprene cuff Wrist with elastic and large tension strap Stretch fabric on the backhand Padded reinforcement on the palm of the lower hand Material Waterproof and breathable with integrated membrane Safety Model Flexible and integrated ankle protection on the backhand Padded reinforcement on the palm of the lower hand
FIT-R2 takes the ergonomic design of its predecessor to new heights. A thinner glove, with narrow-fit gauntlets and all-new metacarpal bone protection, the FIT-R2 easily handles the demands put on race gloves. Features The FIT-R2 are approved to EN 13594:2015 standard Palm 100% made with goat leather Furygan Skin Protect lining – approved by Furygan’s R&D (Motion Lab) to reinforce leather products in terms of tearing and abrasion resistance External protection shell for scaphoid, metacarpals, palm, fingers and side of the hand Multiple reinforcements made with doubled leather layer and additional foam on areas exposed to abrasion in a crash situation (palm, side of the hand, fingers) Ring finger and little finger are held together with a leather piece, to lower fracture risks The goat leather and the pre-shaping offers a high level of feeling on the handlebars Finger stitch seams positioned on the outside, and EXO protectors, for better comfort Stretch insert on the wrist, just before the cuff, in order to allow perfect mobily Between each finger, at the bottom, has been place a specific textile insert to reach a superior stage of comfort Wrist and doubled cuff adjusters. The new cuff features stretch in order to have a better fit, and to be easier to put on Ergomax racing label. The highest ergonomical standard at Furygan
Features tear resistant cow leather Carbon knuckle shell Carbon reinforcements on upper hand and fingers reinforcements on crash areas comfortable inner lining (100 % polyester)
Features ergonomically adjusted cut ventilation insets elastic inserts on the fingers and the back of the hand additional padding and ankle protectors carbon hard shell over the hand ankles carbon scaphoid bone protection thenar slider doubled material on the inside hand additional carboncup with metal insert at wrist velcro fastener on wrist and gauntlet cowhide
Racing glove designed for the racetrack and sports. The RFX1 includes ventilated PU knuckle shells and a large carbon shell to protect the forearm. It offers all the features of a top-of-the-line glove geared towards performance. Kevlar® lining, carbon reinforcements and full grain leather for protection, Stretch Kevlar™ for comfort, a protective barrier for both the palm and the top of the hand, while providing an exceptionally lightweight fit. It also features new Stretch Kevlar and leather construction (instead of all-leather) on the thumb, for improved comfort. The palm features reinforcement in Digital Pittards® leather for optimal grip in wet conditions. The Velcro adjusting strap is concealed beneath a protective leather flap to reduce the risk of the glove being torn off in the event of a fall. This top-of-the-range Racing glove will delight demanding riders of sports bikes, who favor control sensitivity and fit, without overlooking safety. Available in standard and replica versions. Features Full-grain cowhide construction (topside) for durability / Full-grain goatskin (palm) for suppleness Ventilated TPU metacarpal-knuckle protective shells Protective Carbon palm slider shell Palm reinforcement in Digital Pittards® leather Thenar muscle (palm) reinforcement with a Superfabric® patch Internal Kevlar® lining Outer stitching on the fingers (Gütermann thread) Carbon protective shell on the forearm Stretch Kevlar® comfort panel (topside) Dual closure system V-Five Signature element (the inside of the index and middle fingers on the left hand are in red)
Sometimes life takes a soft touch with a heavy hand. The newest of ICON s street specific MX inspired riding gloves is the Hooligan™. The hi-flow mesh backhand is married to the Ax Laredo™ palm resulting in a lightweight street-performance riding glove. The precurved fingers ensure a comfortable fit, while the touchscreen capability allows you to operate your devices without having to remove your glove. A TPR Hook and Loop wrist closure ensures a proper fit. Features TPR wrist closure Pre-curved fingers Touchscreen capability
The WFX Tech is a winter glove… that’s technical, as its name indicates. Its focus is on fit and steering precision for road and suburban riding. Its topside construction combines neoprene, nylon, and leather, for perfect resilience in bad weather. Leather palm with Digital Pittards® reinforcement for improved durability and optimum grip in wet weather. Its PU protective knuckle shells are duplicated for improved comfort. It also includes a new Gore-Tex weatherproof, breathable membrane and a Thinsulate™ 200g lining for thermal insulation. Double closure system with cuff and forearm adjusting straps. A reflective strip on the outer edge so you can be seen at night. A Touch Screen™ system to handle Touch Screens without removing your gloves. The WFX Tech GTX offers the very best to help you face the winter. Features Full-grain goatskin, nylon fabric, and neoprene construction (topside)/full-grain goatskin for suppleness (palm) Weatherproof internal Gore-Tex membrane Thinsulate™200g thermal insulation PU metacarpal-knuckle and knuckle protective shells underneath the fabric and leather TPR protective palm slider shell Digital Pittards® leather palm reinforcement Dual closure system TouchScreen™ system (thumb and index finger) for handling touchscreens
The Jerez 3 Gloves are derived from MotoGP. Thanks to feedback provided by the REV IT! MotoGP riders, a durable and highly abrasion resistant double TPU hard-shell palm slider has been added for a safety boost. Features kangaroo leather cowhide 3D air mesh synthetic PU leather TPU hard-shell finger knuckles TPU hard-shell little finger protector TPU hard-shell thumb protector double TPU hard-shell palm slider ventilated dual comp protector dual-comp protector Temperfoam®, RYONIC Impact Protection Technology race fit comfort adjustment strap double adjustment tab ventilation panels outside stitching stretch lips Pittards® Digital™ grip patches double cuff closure regular cuff harmonica construction
Ergonomy Cuffs adjust and retention strap Material Carbon padding Goat Leather, 0.6/ 0.8 mm thick, high fitting performance Synthetic leather suede Goat Leather Safety Palm padding Back of hand padding Side of hand padding Motorcyclists? protective clothing En 13594:2015 Glove lev.1
The certified Celer V2 Leather Glove is a durable short cuff road riding glove primed for urban performance. Incorporating a newly evolved design with increased stretch insert and perforations, as well as hard knuckle protection, the Celer V2’s premium multi-material chassis offers high levels of fit, comfort and protective capabilities. Construction Durable, multi-panel main shell construction incorporating a supple full-grain goat leather for high levels of comfort, abrasion resistance and breathability Alpinestars race-proven hard PU knuckle protection system for superior impact and abrasion resistance Leather palm construction incorporates padding reinforcements on landing zone for excellent durability and comfort Highly durable advance poly-fabric reinforcements on side of hand, pinky and ring finger, forming a finger bridge to prevent finger roll and separation during impacts Perforated leather on backhand for cooling performance Protection This garment is certified Level 1 Features Short cuff design with hook and loop grip closure for convenience Open knuckle gusset for improve levels of breathability and hand flexibility Ergonomic stretch insert between thumb and palm offers flexibility to vastly improve hand movement Stretch accordions on fingers and thumb to increase flexibility and fit Touchscreen compatibility on index and thumb tips for use with smartphones and GPS systems Clean and elegant styling for distinctive look
Features Short cuff in neoprene with strap Thin glued jersey lining on backhand Safety Certified Supple, integrated knuckle protector on backhand Material Stretch fabric Cotton lining
STS-R Lady is the women version of a Spidi sporty glove with large areas of use. Made from a blend of sheep and cow hides, has a knuckles shield in polyurethane and microfiber Clarino® palm. Features 0.7 mm cowhide on the back 0.6 mm sheep hide on the palm Polyurethane knuckles protector Clarino® microfiber palm EVA reinforcements on hand side Velcro closure on sleeve Product weight: 0, 20Kg Back of hand padding Top performing Clarino microfiber
Material goat skin upper highly abrasion-resistant kangaroo leather palm colourfast & sweat-proof Lining unlined Comfort special flat seam elasticated leather panels on back and fingers tunnel strap velcro adjustment at wrists & cuffs perforated leather back special leather at finger which allows smartphone operation visor wiper Safety certified under norm EN 13594:2015 „protected glove for motorcyclists“ DuPont™ KEVLAR® fibre protection on back of hand (DuPont™ KEVLAR® are trademarks or registered trademarks of E.I. du Pont de Nemours and Company) hard plastic knuckle protection SuperFabric® reinforcement on fingers & edge of hand finger-bridge between ring finger & pinkie Side of hand has hard plastic protection
Lady Glove made of goatskin leather and textile mix Features GORE-TEX® X-TRAFITTM membrane Palm made of leather with double layer of Clarino Ball of the hand with double layer of leather and padding Break proof PVC moulding covered with leather over knuckle Stretch on fingers and back of the hand Finger with paddings Little finger reinforced with schoeller® keprotec® Wrist stretch adjustable with Velcro Width adjustable cuff with Velcro fastener Reflective inserts on back of the hand and cuff Water barrier on the cuff end Push-Pull Pique inner lining Safety: fulfill the requirements of the directive N° 89/686/EEC
Features Injected carbon knuckle protector with integrated vents Slider on bottom palm Injected and ventilated sliders on fingers Sidewall reinforcement Lining with DuPontTM Kevlar® fibers Perforated palm, ventilated sliders on fingers, ventilation on knuckle protector Large cuff with double strap tightening Elasticated wrist with strap on the inside Flex leather on fingers Ease gusset on backhand Anti-twist system on little finger PSA certified
The partially ventilated, comfortable, short-cuffed Metric sport gloves are ideal for summer use. They feature a TPU hard-shell knuckle and palm slider, 3D air mesh panels in all the right places for maximum airflow, and are predominantly constructed of drum dyed goat leather. The Connect Finger Tip is included so riders dont need to take their gloves off when operating touchscreens. A hook-and-loop closure at the wrist ensures a snug/perfect fit every time. Features Adjustment strap at wrist - The hook-and-loop adjustment strap at the wrist allows for optimum adjustability and fit when using our gloves. Find the ideal tightness and comfort every time it is used. Stretch fabric on back of hand Stretch lips at fingers Short cuff Hook-and-loop closure Ventilation holes Leather Connect Finger Tip - Never remove your gloves to answer your phone or use your navigation system again. The connect fingertip leather has been developed specifically to operate touch screens. These gloves are certified according to the EN 13594 Standard, published in 2015 and have achieved level 1 KP rating. Outer garment 3D Air Mesh - This knitted fabric has an open, 3-dimensional structure that ensures good ventilation while riding. 3D air mesh is a must-have for long touring riders. Corduroy Cowhide - Cowhide has been used in this garment for optimal fit and protection. Goatskin - Tanned leather made from goatskin is considered extremely durable, and is often used for gloves and other products that require a soft hide. PWR Shell 500D stretch Consisting of 100% high-performance polyamide yarns, PWR Shell 500D stretch takes the best properties of a nylon with a high melting point, tremendous tear and abrasion-resistance, and excellent durability and then puts the unique REV’IT! design stamp on it. This PWR Shell fabric comes in a stretch variant. The 500D indicates the density of the fabric. The higher the number the better the abrasion and tear resistance properties are. Lining Tricot liner - Thanks to its unique close knit weave pattern Tricot is smooth on one side, while sporting texture on the other side. This makes it sturdy and soft—ideal to use in a comfortable and durable liner that will hold its shape for a very long time. Protection TPU hard shell finger knuckles - Thermoplastic Urethane (TPU) is a highly durable synthetic material, used in many REV’IT! products for protection and waterproofing. TPU hard shell knuckle TPU hard shell palm slider - Palm slider made of a durable and high abrasion resistant TPU material at the palm side of the glove. The palm slider makes sure that the glove slides in case the palm of the hand comes in contact with the asphalt. The abrasion resistance of gloves equipped with these sliders is greatly increased, thus reducing the risk of injury significantly.
Equipment: ergonomically adjusted cut Ventilation in leather additional padding elastic inserts on fingers and back of hand Security: Hard on the knuckles reflective piping Double material on the palm Velcro wrist and cuff Material: cowhide Upper: 100% leather Lining: 100% polyester
security Upper hand protection by hard shell ankle protection Palm reinforcement Handball gain Double layer of material domestic equipments ergonomically shaped stretch panels elasticated adjustable velcro closure long cuff properties breathable
Ventilated short glove with dedicated VR46 graphics. Features Dainese Smart Touch on the index finger Reflective inserts Soft inserts on the knuckles VR46 customized details Adjustable cuff strap Neoprene cuff Pre-curved fingers Amica suede palm Breathable and elasticated fabric Gloves certified to Cat. II Pr-EN 13594 Standard lev. 1 Reinforced palm Perforated mesh fabric on the fingers and the back of the hand
With full updated ergonomic shaping and design details, the GP Plus R v2 glove gives the most demanding sports rider protection, feel, flexibility and comfort. This innovative and protective leather and multiple-material construction affords a secure and precise fit, and features Alpinestars patented finger-bridge to prevent contortion and finger separation. Features: Localized perforations on palm and backhand, plus ventilated finger fourchettes keep the hands cool. Ergonomically engineered leather reinforcements on the palm and outer hand landing zones provide maximum abrasion resistance in key impact zones. Alpinestars developed ergonomic stretch insert between thumb and palm offers flexibility to vastly improve hand movement. Pre-curved finger construction reduces rider fatigue and offers improved comfort. Advanced polymer compound palm and finger sliders for impact and abrasion resistance. Protective double cuff closure with TPR logo wraps around wrist and raises the entire profile of the glove to protect wrist bone from impact in a crash. Closure incorporates Velcro wrist adjustable strap for secure, personalized fit. Dual cuff closure on wrist for a secure fit and precision adjustment. Stretch leather accordions on fingers and thumb for superior fit and flexibility. Innovative multi-panel leather construction that is ergonomically profiled for performance. Alpinestars’ exclusive Dynamic Friction Shield (DFS) protectors feature advanced airflow ventilation and a dual density polymer mold construction for superior performance against repeat impacts as well as abrasion resistance. Internal aramidic fiber hand and thumb reinforcement, plus an aramidic fiber layer around little finger gives excellent abrasion resistance. Alpinestars patented third and fourth finger-bridge prevents leather from twisting on fingers, and helps prevent potential burst seams and finger separation. Palm pad panel combined into palm/thumb/little finger reinforcement. External finger and palm seams for a close fit and superior feel. Printed logos for weight-saving and material integrity.
Built to beat the heat, this light certified glove has been specifically designed for the female hand and features a leather and mesh chassis to provide optimal ventilation for warm weather performance riding. Incorporating innovative carbon and polymer compound protection, this pre-curved glove is fully optimized for warm weather performance riding. It’s practical too and has a touchscreen compatible fingertip for use with GPS systems and smartphones. Features Short vented summer glove designed specifically for female hands. Outer seam palm construction for enhanced levels of rider comfort. Sport styling for an aggressive look. Hard carbon knuckle for superior resistance to repeated impacts. Knuckle panel with perforated gusset construction to increase flexibility. Full perforated leather with open stretch mesh for improved ventilation. Wrist closure flap. Side reinforcements with hard palm slider for superior abrasion resistance. Accordions on fingers to increase fit and direct comfort. Thumb and palm reinforcement for a superior grip. Ergonomic stretch insert on palm and soft padding on fingers and cuff for greater rider comfort. Touchscreen compatible fingertips. TPR inserts on fingertips. certified (CAT II Level 1, KP).
THE new Racing glove in the Five 2020 collection! The RFX2, Five´s most affordable glove to get you started around the track, now features a new look that echoes the stylistic signatures of top-level competitive riding. It even adopts components used in more advanced styles, including the TPU cuff from the RFX Race, or the ventilated protective shells of the RFX1, and an internal Kevlar lining, giving it all the features of a high-end glove. It offers an impressive level of performance, focused on an excellent comfort-to-protection ratio, with unequaled value for money in this category. Don’t hesitate to examine every last detail of its technical specs: at a price like this, you’ll definitely be convinced. In addition, its dynamic design makes it a glove that’s just as beautiful to look at as it is to wear, even when you’re idling. And that matters, when you love the sculpted curves of beautiful sport models. Features Full-grain goatskin and Stretch Cordura construction (topside) / Goatskin (palm), for extreme suppleness Ventilated TPU protective metacarpo-phalangeal shells Metacarpal reinforcements in 5mm-thick foam rubber Synthetic leather palm reinforcement with a silicone print for grip on the handlebars Stretch Cordura comfort panels around the thumb and the ends of the index and middle fingers Internal Kevlar lining on the top of the hand and around the thumb External stitching on the fingers (in Gütermann thread) TPU hypothenar protective shell (palm slider) TPU protective forearm shell (identical to the one used on the RFX Race) Dual closure system, with an adjustment tab under a protective flap V-Five Signature element (red on the inside of the index and middle fingers of the left hand)
Security Upper hand protection made of hard shell Ankle protection Knox protectors in the palm area palm reinforcement palm reinforcement Material duplication Equipment ergonomically formed stretch inserts Elastic band adjustable velcro long cuff properties breathable
A standing tradition in ICON’s line of MX inspired, street-specific lightweight riding gloves. All our standard performance amenities are here, such as a pre-curved palm and finger design, thermoplastic rubber knuckles, and a secure wrist closure system. Of course a street motorcycle glove isn’t really a glove without a leather palm. The Twenty-Niner glove features a goatskin palm capable of hand-to-hand combat with gravel choked asphalt. With its hi-flow mesh backhand, the Twenty-Niner glove is perfect for spring and summer riding. Features Abrasion resistant goat leather reinforcement on the palm Pre-curved Palm and Finger Design TPR Hook and Loop Wrist Closure Tested and Certified According to Standard - EN 13594:2015, Level 1
Features Textile with waterproof Hipora membrane Waterproof TPR knuckle protector under textile TPR palm slider Bemberg liner Reflective parts on top Neoprene wrist with velcro closure Touchscreen forefinger
Features Palm from Amara Finger sidewalls made of spandex Back made of printed mesh Adjustable cuffs with velcro Silicone pressure on the palm Direct injected TPR parts on ankles and fingers This product is a personal one Protective equipment (PPE) category I
Features Unlined 4-way stretch for optimal fit Ankle protection hard shell Ventilation openings Reinforced palm Foam inserts Grip insert Closure with velcro strap
Ergonomy Bracelet adjustment and wrist closure Material Highly resistant Clarino velor microfibre Carbon inserts Perforated leather Goat leather in 0, 6 / 0, 8 mm thickness, high fit result Saftey Motorcyclist s protective glove according to PSA En 13594: 2015 certified - Level 1 Padding of the palm Padding on the back of the hand Upholstery of the hand outside Palm with reinforcements of Warrior technology Other characteristics Touch screen-ready finger inserts
Racing glove made of goatskin, cow and Pittards® leather Features Palm made of Pittards® Sheepskin WR 100X leather with double layer of leather Break-proof Carbon/PVC moulding over the knuckle Plastic padding on the wrist Fingers with double layers of leather and PU mouldings Stretch on fingers Finger sidewalls with ventilation holes Ball of the hand with double layer of schoeller® keprotec®, padding and PU moulding Anti-slip finger tip sections (index and middle finger) Ergonomically pre-shaped palm Back of the hand with ventilation perforations TPR moulding with ventilation on the back of the hand Wrist stretch with protective flap and Velcro fastener Width adjustable cuff with Velcro fastener Safety connection between ring and little finger Upper side of the glove, inside reinforced with aramide fabric Safety: fulfill the requirements of the directive N° 89/686/EEC
Have a taste for dragon-slaying titanium gloves but a preference for shorter cuffs? The TiMax Short glove provides all the coverage of its full-length brother, but with a go-fast silhouette. Floating knuckle construction, capped with military-grade titanium plates, provides coverage with flexibility. The cuff is a unique wrist wrap style, developed to keep things on lock should rider and bike go their separate ways. Slay your personal dragons, flex like a barbarian, and always cover the rear. Features Military-grade Titanium Knuckle and Finger Plates Leather Backhand Floating Knuckle Construction Expansion Panels Dual Wrist Closure Battlehide Palm Leather Overlays Conditions Superior heat retaining materials with a focus on fit to provide ample range of motion, keeping you comfortable on mild to colder riding days. Palm Material We use goatskin because of the soft and supple charicteristics it posesses due to the presence of lanolin in the leather. It s also a thinner leather, giving you a closer more dexterous fit. Material Not only do we use leather for its abrasion resistance, but also because it breathes and has the ability to absorb humidity. It can keep you warm in cold weather and cool when it’s hot outside.+ Expansion Gusset Expansion gussets are added to disperse stress in key areas to improve fit and flexibility. Battlehide™ Palm We use abrasion resistant premium grade Battlehide™ goatskin because it is lighter than cowhide and is quite supple, yet extremely durable, perfect for hi-velocity engagements.
Constructed from highly abrasion resistant, full grain leather and featuring a rugged polymer knuckle protection, the SP-5 offers high levels of protection, movement and comfort. With a pre-shaped finger construction and a velcro cuff closure this glove affords a secure and highly personalized performance riding fit. Features Top surface built with high performance synthetic leather associated with perforated goat leather to provide optimized levels of comfort, durability and cooling airflow An innovative microfiber and PU grip insert strategically position on palm and thumb for excellent levels of grip control and durability Premium, full-grain leather palm construction is durable and offers excellent abrasion resistance Ergonomically profiled synthetic suede reinforcements on pinky sidewall provide maximum abrasion resistance in key impact zone Alpinestars’ patented third and fourth finger bridge prevents seam failure and finger separation in the event of a slide Excellent impact performance offered by an advanced over-molded polymer knuckle protector Alpinestars’ exclusive ergonomic stretch insert between palm and thumb offers improved range of hand movement and greater sensitivity while operating the bike controls Pre-curved finger construction reduces rider fatigue while offering excellent comfort and fit Palm, fingers padded with energy absorbing EVA foam for additional protection Velcro wrist adjuster and widevelcro strap on the cuff provide a secure and adjusted closure Touchscreen compatible index fingertip and thumb allow the use of smartphone and GPS systems
The Revit League gloves claim ther Spot within our sportive glove Collection, offering a complete Package to Sport Rider without going full Spec. The highly abrasion-resistant leather outer shell has received valuable protection upgrades such as a hard knuckle protector, a hard-shell palm slider, and a TPU wrist protector on the double closure long cuff. The League offers the true racing glove feel, as well as race-ready protection to a broader audience. Protection Hard knuckle
Spidi Carbo Track Replica is the latest evolution of Spidi Carbo Track, a world reference for high level racing gloves, now featuring same colour scheme as Ducati MotoGP rider Andrea Dovizioso. It combines excellent fit and riding sensitivity with the highest levels of protection. This is the glove chosen by our riders competing in the major World Championships. Technical features: Full-grain leather, thickness 0.8 mm Areas in perforated leather Cowhide palm with Clarino® reinforcements Keramide lining for maximum abrasion and heat resistance Keramide stitching Double stitching on dangerous areas Reinforcements with Warrior technology applied on the entire side and over pinkie finger Carbon fiber shields on the knuckles, phalanges and metacarpus Special construction on the shield area for a better fitting and higher protection Knuckle protector with Dumper siliconic shock absorber insert Shock-absorbing padding Velcro strap for closure on the wrist Double Velcro closure on the forearm Product weight: kg. 0, 40
Features Injected carbon knuckle protector with integrated vents Slider on bottom palm Injected and ventilated sliders on fingers Sidewall reinforcement Perforated palm Elasticated wrist with strap Flex leather on fingers Screen Touch System: index compatible with touch screens PSA certified
Outer shell highly abrasion-resistant kangaroo leather colourfast & sweat-proof Lining unlined Fit/features special step seam avoids pressure points on inner hand & enhances feel Perforated hand for maximum ventilation, feel and comfort. velcro adjustment at wrists & cuffs pre-formed, crease-free palm visor wiper elasticated leather panels on back, thumb & fingers perforated finger side walls Protection SUPERFABRIC® reinforcement on fingers & edge of hand Titanium knuckle protectors SUPROTECT® shock-absorbing special foam on back of hand & ball of thumb
Features Visor wiper Special leather at finger which allows smartphone operation Perforated leather panels Perforated finger side walls Elasticated leather panels on back and fingers Velcro adjustment at cuffs Protection Certified under norm EN 13594:2015 "protective glove for motorcyclists" Hard plastic knuckle protection Reinforced edge of hand Palm & ball of thumb reinforced with SuperFabric®-brand material underlaied with Armaprotec Lining Unlined Outer shell Goatskin Colourfast & sweat-proof
Ergonomy Cuffs adjust and retention strap Material Carbon padding Goat Leather, 0.6/ 0.8 mm thick, high fitting performance Synthetic leather suede Goat Leather Safety Palm padding Back of hand padding Side of hand padding Motorcyclists protective clothing En 13594:2015 Glove lev.1
SPIDI Rainshield glove is perfect for touring in the mid-season or for long-range raid on motorcycle. Thanks to Outdry® technology, Rainshield combines the ultimate riding feeling, 100% waterproofness and an unparalleled softness. Another strength of the Outdry® technology is the reduction of the volume inside the glove. Features Stretch outer fabric Outdry® membrane Powertech knuckles shield with dynamic air intake Clarino® Palm Warrior protection on the palm Neoprene details Product weight: kg. 0, 17
Features ergonomically adjusted cut ventilation insets elastic inserts on the fingers and the back of the hand additional padding and ankle protectors carbon hard shell over the hand ankles carbon scaphoid bone protection thenar slider doubled material on the inside hand additional carboncup with metal insert at wrist velcro fastener on wrist and gauntlet cowhide
Features soltoTEX® membrane with Tri-fleece inner lining Palm made of leather with leather double layer Ball of the hand with leather double layer and padding Reflective print on the back of the hand and index finger Finger with leather double layer and padding Finger stretch Break-proof PVC moulding covered with textile over knuckle Wrist stretch with safety flap, adjustable with Velcro Width adjustable cuff with Velcro closure Water barrier on the cuff end Safety: in accordance with the standard EN13594:2015
Protection certified under norm EN 13594:2015 "protective glove for motorcyclists" leather covered hard plastic knuckle protection reinforced edge of hand & thumb Fit/features visor wiper elasticated panels on back and fingers special leather at finger which allows smartphone operation perforated leather panels perforated finger side walls special flat seam velcro adjustment at cuffs Lining unlined palm silk lined back Polyester Outer shell goatskin colourfast & sweat-proof
Material Tactel® fabric for peerless comfort amara panels Safety Schoeller® Keprotec® reinforcements leather coated knuckle shell according to EN 13594:2015
Features: Long cuff with tightening strap Elasticated wrist with tightening strap Flex on fingers and backhand Rain wiper on index Index compatible with touch screens Inner lining in soft micropolar on palm side, velvety polar on back of hand
Features Short cuff in neoprene with strap Thin glued jersey lining on backhand Perforated mesh fabric Supple, integrated knuckle protector on backhand Palm reinforced
Sports glove made of goatskin and kangaroo leather Features Light textile inner lining Palm made of kangaroo leather with double layer of digital leather Ball of the hand with double layer of leather, padding and Knox TPU protector Double layer of leather on the little finger Break-proof TPU moulding with iXS Air-Intake-System and replaceable coloured element over knuckle TPU moulding on the back of the hand Break-proof TPU moulding on wrist Double layer of leather and TPU mouldings on the fingers Padding on thumb Finger stretch on thumb, index, middle and ring finger Safety connection between little finger and ring finger Ergonomic pre-formed fingers Stretch insert and padding under the knuckle protector Index finger with touchscreen-capable material Wrist stretch with safety flap, adjustable with velcro Width adjustable cuff with double velcro Cuff made of elastic material to be able to wear the cuff also under the sleeve cuffs Upper side of the glove, inside reinforced with aramide fabric Safety: in accordance with the standard EN13594:2015
Dainese Mig C2 men s motorcycle gloves. The use of cowhide and mesh fabric makes these certified, ventilated summer gloves resistant yet provides excellent performance characteristics. Comfortable and light Mig C2 gloves were designed for riders who enjoy taking their bikes out for a run on hot and sunny summer days. Thanks to a different layers of cowhide and mesh inserts, these short sports gloves blend ventilation with performance and resistance. The sports look which characterises Category II - Pr-EN 13594/2010 level 1 certified Mig C2 gloves is enhanced by polyurethane knuckle protectors for additional safety. Material Cowhide Ergonomics Cuff adjustment strap Pre-curved finger Inserts in polyurethane on knuckles Temperature adjustment Mesh fabric inserts Homologation Cat. II - Pr-EN 13594/2010 Standard lev. 1 Cowhide Offers a good level of breathability while ensuring elevated resistance to abrasion
The VR46 SECTOR SHORT short leather sports glove is part of the exclusive VR46 by Dainese collection and offers performance at the highest level thanks to technologies derived from the experience of the MotoGP World Championship, in the style of Valentino Rossi. The safety typical of Dainese products is guaranteed by the ankles with carbon fibre plate and the DCP system that protects the little finger, one of the most stressed parts of the body in case of a fall. The VR46 Sector Short can be used even on the hottest days thanks to mesh inserts on the back and localised perforations on the inside of the fingers, which ensure maximum ventilation at all times. Thanks to the special composition of the palm in Amica Suede with goatskin inserts, great comfort and sensitivity for the handlebars is possible. Features Soft inserts VR46 Details Adjustable cuff closure Microelastic inserts Neoprene cuff Pre-curved fingers Amica suede super soft palm Mesh fabric inserts Goatskin reinforcement between thumb, index finger and palm Composite carbon inserts at the ankles DCP system on the little finger Leather plate on the side of the hand Polyurethane insert at the joints of the fingers and palm Perforation on the inside of the finger Gloves Cat. II - EN 13594/2015 cat. II level 1
With full updated ergonomic shaping and design details, the GP Plus R gives the most demanding sports rider protection, feel, flexibility and comfort. This innovative and protective leather and multiple-material construction affords a secure and precise fit, and features Alpinestars patented fingerbridge to prevent contortion and finger separation. Features Localized perforations on palm and backhand, plus ventilated finger fourchettes keep the hands cool Ergonomically engineered leather reinforcements on the palm and outer hand landing zones provide maximum abrasion resistance in key impact zones Alpinestars developed ergonomic stretch insert between thumb and palm offers flexibility to vastly improve hand movement. Pre-curved finger construction reduces rider fatigue and offers improved comfort. Advanced polymer compound palm and finger sliders for impact and abrasion resistance. Protective double cuff closure with TPR logo wraps around wrist and raises the entire profile of the glove to protect wrist bone from impact in a crash. Closure incorporates Velcro wrist adjustable strap for secure, personalized fit. Dual cuff closure on wrist for a secure fit and precision adjustment. Stretch leather accordions on fingers and thumb for superior fit and flexibility. Innovative multi-panel leather construction that is ergonomically profiled for performance. Alpinestars’ exclusive Dynamic Friction Shield (DFS) protectors feature advanced airflow ventilation and a dual density polymer mold construction for superior performance against repeat impacts as well as abrasion resistance. Internal aramidic fiber hand and thumb reinforcement, plus an aramidic fiber layer around little finger gives excellent abrasion resistance. Alpinestars’ patented third and fourth finger-bridge prevents leather from twisting on fingers, and helps prevent potential burst seams and finger separation. Palm pad panel combined into palm/thumb/little finger reinforcement External finger and palm seams for a close fit and superior feel. Printed logos for weight-saving and material integrity. The GP Plus R Glove is certified to Level 1.
Features knuckle protector on backhand Slider on bottom palm Foam reinforcements on fingers Sidewall reinforcement Perforated leather on backhand and palm Large cuff with strap tightening Elasticated wrist with strap Flex leather on fingers and backhand PPE certified
Protection reinforced edge of hand & thumb reinforced edge of hand certified under norm EN 13594:2015 "protective glove for motorcyclists" Fit/features perforated finger side walls velcro adjustment at cuffs special leather at finger which allows smartphone operation Lining unlined palm lightweight lined back Outer shell goatskin colourfast & sweat-proof
With full updated ergonomic shaping and design details, the GP Plus R gives the most demanding sports rider protection, feel, flexibility and comfort. This innovative and protective leather and multiple-material construction affords a secure and precise fit, and features Alpinestars patented fingerbridge to prevent contortion and finger separation. Features Localized perforations on palm and backhand, plus ventilated finger fourchettes keep the hands cool Ergonomically engineered leather reinforcements on the palm and outer hand landing zones provide maximum abrasion resistance in key impact zones Alpinestars developed ergonomic stretch insert between thumb and palm offers flexibility to vastly improve hand movement. Pre-curved finger construction reduces rider fatigue and offers improved comfort. Advanced polymer compound palm and finger sliders for impact and abrasion resistance. Protective double cuff closure with TPR logo wraps around wrist and raises the entire profile of the glove to protect wrist bone from impact in a crash. Closure incorporates Velcro wrist adjustable strap for secure, personalized fit. Dual cuff closure on wrist for a secure fit and precision adjustment. Stretch leather accordions on fingers and thumb for superior fit and flexibility. Innovative multi-panel leather construction that is ergonomically profiled for performance. Alpinestars’ exclusive Dynamic Friction Shield (DFS) protectors feature advanced airflow ventilation and a dual density polymer mold construction for superior performance against repeat impacts as well as abrasion resistance. Internal aramidic fiber hand and thumb reinforcement, plus an aramidic fiber layer around little finger gives excellent abrasion resistance. Alpinestars’ patented third and fourth finger-bridge prevents leather from twisting on fingers, and helps prevent potential burst seams and finger separation. Palm pad panel combined into palm/thumb/little finger reinforcement External finger and palm seams for a close fit and superior feel. Printed logos for weight-saving and material integrity. The GP Plus R Glove is certified to Level 1.
Protection certified under norm EN 13594:2015 "protective glove for motorcyclists" hard plastic knuckle protection knuckle protection tested (impact test for knuckle protection) ball of thumb reinforced with SuperFabric®-brand material underlaied with Armaprotec Fit/features visor wiper silicone-printed palms velcro adjustment at cuffs air-vents on fingers Lining unlined palm silk lining Polyester Outer shell goatskin palm Nyspan and microfibre back colourfast & sweat-proof
Material goat skin upper highly abrasion-resistant kangaroo leather palm colourfast & sweat-proof Lining pique push-pull lining Membrane GORE-TEX® membrane Comfort + Gore Grip technology special flat seam tunnel strap velcro adjustment at cuffs leather stretch panels on thumb and fingers special leather at finger which allows smartphone operation visor wiper Safety certified under norm EN 13594:2015 „protected glove for motorcyclists“ hard plastic knuckle protection SuperFabric® reinforcement on edge of hand (brand material) reinforced edge of hand Side of hand has hard plastic protection
A full gauntlet of decadent French cowhide, custom molded knuckles, and tailored for a woman’s hand. Governments have been toppled for less. The Fairlady Glove is the handwear of an agent provocateur. Built for the rigors of hardcore motorcycle riding, but with the fierce silhouette defined by the ICON 1000 womens collection. Extensive use of laser detailing, TPU knuckle, integrated flex zones, and floating knuckle construction make this glove equally at home on either the track or the street. If your mission mixes equal parts couture and clandestine, the Fairlady glove will provide the upper hand. Features MATERIAL: French Cow Leather Chassis DETAILS: TPU molded Knuckle, Tactical Black-Oxide Metal Zipper, Perforated backhand and fingers, Hook & loop wrist strap, Pre-curved palm
Outer shell goat skin upper highly abrasion-resistant kangaroo leather palm colourfast & sweat-proof Lining unlined Fit/features special flat seam velcro adjustment at cuffs perforated finger side walls stretch fabric panels on back stretch material on thumb and fingers special leather at thumb and finger which allows smartphone operation visor wiper Protection DuPont™ KEVLAR® fibre protection on back of hand (DuPont™ KEVLAR® are trademarks or registered trademarks of E.I. du Pont de Nemours and Company) hard plastic knuckle protection SuperFabric® reinforcement on fingers & edge of hand reinforced edge of hand & thumb reinforced edge of hand double material at edge of hand & fingers
Features Tour and cross glove made of Airmesh, neoprene, spandex and Amara Palm from Amara with Amara doubling Palm with Amara doubling Airmesh inserts on fingers and backs of hands Silicone prints on the palm and fingers for an optimized grip Direct injected TPR molded parts on the back of the hand and fingers Adjustable cuffs with velcro
Features Knuckle protector Slider on bottom palm Injected and ventilated sliders on fingers Sidewall reinforcement Perforated palm, ventilated sliders on fingers, mesh on backhand Elasticated wrist with strap Flex leather on fingers Screen Touch System: index compatible with touch screens PPE certified
Features: Large cuff with double strap tightening Elasticated wrist with strap on the inside Flex leather on fingers Ease gusset on backhand Anti-twist system on little finger
The successor of the Warrior glove. As a long sports racing glove it offers the best price quality. Available for men and women. Features Combination of beef & goat leather with solid Lycrage fabric Fixed knuckle protectors according to EN-13594: 2002 Reinforcements on the fingers and leather and rubber handlebars Double velcro straps guarantee the perfect fit
The Higgins are for the riders who require the best protection with unmatched feeling and comfort. Nothing more, nothing less. Protection External protection shells for palm and metacarpals Multiple reinforcements Ergonomics Available from 2XS to 3XL: Tailored for every morphology (men, ladies, children) Finger seams positioned on the outside Pre-shaped Doubled cuff adjuster Stretch insert on the wrists Material Goat leather Certified EN13594
Racing style and the use of colours make this leather glove even more aggressive than the previousversion. Features Soft cowhide Keramide reinforced palm Powertech cushions Elastic junctions on fore and middle finger Velcro straps on wrists
Features Sportive Air Vent gloves made of soft leather, through the mesh material the perfect choice for the summer So that navigation devices and smartphones can also be operated with the gloves, there is a special touch-sensitive fabric at the tips of the index finger and the thumb incorporated Inside, the Axis is processed with a soft polyester lining Hard ankle protectors and pads on the fingers and palm provide added protection Velcro closures ensure a good fit
Features Short cuff Wrist with tightening strap Index compatible with touch screens Inner lining in micropolar Safety Certified Supple and integrated knuckle protector on backhand Palm reinforcement
The SP-365 Drystar® glove is a performance riding glove packed with protective features such as Alpinestars new SP knuckle protector. Featuring Alpinestars 100 per cent waterproof and breathable Drystar® performance technology for effective all-weather protection and a reduced material design offering superior sensitivity on the bike’s controls. Features Constructed from a supple and highly durable PU and softshell chassis to provide core abrasion resistance and durability Leather on palm for superior abrasion resistance in a key area Advanced poly-textile reinforcements on palm and thumb provides superior grip on bike’s controls. Synthetic leather reinforced outer hand with padding on landing zones provide maximum abrasion resistance Alpinestars developed ergonomic stretch insert between thumb and palm offers flexibility to vastly improve hand movement Durable new flexible Alpinestars SP knuckle protection provides class-leading impact and abrasion protection, and incorporates heat stamped logo Constructed with Alpinestars 100 per cent waterproof Drystar® performance membrane construction technology (palm only), thereby affording a highly reduced material chassis to promote dexterity and sensitivity of bike controls Palm, fingers and backhand padded with energy absorbing EVA foam for improved comfort and fit Adjustable double hook and loop closure on cuff and wrist keeps glove safely and securely in position Touchscreen compatible fingertip area on index for use with smartphones and GPS systems Finger-bridge prevents excessive finger roll and separation during impacts Printed logos for weight-saving and material integrity According to European statutory law the mark is a conformity requirement for the marketing of this product. The following standards apply to this product: EN 13594 2015, Level 1 KP
The multi-panel Booster Glove is made from premium leather and incorporates an over-molded hard-knuckle guard for optimized levels of protection. Featuring Alpinestars’ stretch palm insert as well as grip panels the Booster provides excellent sensitivity on the bike’s controls. Features Constructed from durable goat leather associated with high abrasion resistant stretch polyester fabric Innovative microfiber and PU grip panels strategically position on palm and thumb for excellent levels of grip control and durability Premium, full-grain leather palm construction is durable and offers excellent abrasion resistance Alpinestars’ exclusive ergonomic stretch insert between palm and thumb offers improved range of hand movement and greater sensitivity while operating the bike controls Accordion stretch inserts on fingers and back hand for all-round movement and comfort Alpinestars’ patented third and fourth finger bridge prevents seam failure and finger separation in the event of a slide Molded hard-knuckle protector provides impact and abrasion protection. Guard is reinforced on the interior side with thick EVA foam for improved levels of fit, comfort and shock absorption Palm, thumb and fingers padded with energy absorbing EVA foam for additional protection Wrist flap with velcro on cuff provides a secure closure Little finger side wall suede reinforcement for abrasion resistance Touchscreen compatible index fingertip and thumb allow the use of smartphone and GPS systems Pre-curved finger construction reduces rider fatigue while offering excellent comfort and fit
Incorporating Alpinestars exclusive DRYSTAR® PERFORMANCE technology for excellent levels of sensitivity on the bike’s controls, the Santiago is 100% waterproof and features a hard knuckle protector to ramp up the protective features on this superb all weather riding glove. SANTIAGO DRYSTAR® GLOVE KEY FEATURES: Constructed using Alpinestars’ DRYSTAR® PERFORMANCE material technology, which incorporates a sealed and bonded triple layer construction to offer: Reduced material chassis which promotes high levels of comfort, tactility and sensitivity on the bike’s controls. High levels of durability and interior material integrity. Excellent windproofing performance. Glove incorporates Alpinestars’ exclusive 100 per cent waterproof and breathable DRYSTAR® membrane. Constructed from durable Clarino palm and thumb for excellent levels of durability and abrasion-resistance. Synthetic suede reinforcement on palm and outer hand provide abrasion resistance in key impact zones. Over-molded, advanced polymer knuckle protection provides excellent levels of impact and abrasion-resistance. EVA foam padding on fingers and outer-hand for excellent comfort and fit. Extended gauntlet wrist construction for maximum coverage and weather protection. Reflective detailing on thumb and wrist improves visibility of rider in poor light conditions. Velcro® cuff closure for a comfortable and secure fit. Elasticated wrist cuff ensure safe and close-fitting fit. Smartphone compatible finger-tip on index finger for use with GPS systems, tablets or smartphones.
Brand new design. A sports and road glove aimed at those seeking discreet protection. The PU knuckle protection shells and the memory-foam finger protection are well presented and fulfil their role perfectly, but are concealed beneath the glove’s leather upper. This allows it to carry a large but discreet printed FIVE pictogram. Full-grain leather structure. TPR cuff protection and protective palm slider. The RFX 3 Replica offers an excellent compromise between comfort and protection, modernity and tradition. V-FIVE Signature.
Features Combination of premium kangaroo, cow & goat leather Hard knuckle protector in accordance with EN-13594:2002 TPU Knox palm protector mcFit® technology attaching inner lining, membrane and outer fabric securely to each other Hipora® waterproof insert
Built to beat the heat, this light certified glove features a leather and mesh chassis to provide optimal ventilation for warm weather performance riding. Incorporating innovative carbon and polymer compound protection, this pre-curved glove is fully optimized for warm weather performance riding. It’s practical too and has a touchscreen compatible fingertip for use with GPS systems and smartphones. Features Short vented summer glove. Outer seam palm construction for enhanced levels of rider comfort. Hard carbon knuckle for superior resistance to impacts. Knuckle panel with perforated gusset construction to increase flexibility. Full perforated leather with open stretch mesh for improved ventilation. Wrist closure flap. Side reinforcements with hard palm slider for superior abrasion resistance. Accordions on fingers to increase fit and direct comfort. Thumb and palm reinforcement for a superior grip. Ergonomic stretch insert on palm and soft padding on fingers and cuff for greater rider comfort. Touchscreen compatible fingertips. TPR inserts on fingertips. certified (CAT II Level 1, KP).
Features knuckle protector on backhand Slider on bottom palm Foam reinforcements on fingers Sidewall reinforcement Perforated leather on backhand and palm Large cuff with strap tightening Elasticated wrist with strap Flex leather on fingers and backhand PPE certified
Features Sidewall reinforcement Perforated palm, ventilated sliders on fingers Large cuff with strap tightening Elasticated wrist with strap Flex leather on fingers
Features Short neoprene cuff Wrist with tightening strap Index compatible with touch screens Inner lining in micropolar Safety Certified Knuckle protector on backhand Reinforced on bottom palm Material Goat leather Neoprene
Engineered to perform, built to last and to protect, the long-cuffed Quantum 2 gloves have been designed to look great with any one-piece suits or sport jackets in the REV IT! Quantum collection. Race-spec knuckles, finger, palm, and cuff protection and sliders, are just a few incorporated features. Supple yet strong drum dyed goatskin and cowhide leather and stretch panels protect hands and allow for freedom of movement. An adjustment strap at the wrist and an adjustment tab at the cuff ensure the Quantum 2 gloves stay secure while riding. Features Adjustment strap at wrist - The hook-and-loop adjustment strap at the wrist allows for optimum adjustability and fit when using our gloves. Find the ideal tightness and comfort every time it is used. Adjustment tab at cuff Stretch lips at fingers Long cuff Hook-and-loop closure Grip patch at palm - A grip patch is made with a texturized pattern to deliver a superb grip performance. Outside stitching - The PWR yarn stitching is positioned on the outside of the glove, eliminating any potential pressure points at the seams, and giving these gloves the ultimate sensitivity every racer demands. Ventilation holes These gloves are certified according to the EN 13594 Standard, published in 2015 and have achieved level 1 KP rating. Outer garment 3D air mesh - This knitted fabric has an open, 3-dimensional structure that ensures good ventilation while riding. 3D air mesh is a must-have for long touring riders. Cowhide - Cowhide has been used in this garment for optimal fit and protection. Goatskin - Tanned leather made from goatskin is considered extremely durable, and is often used for gloves and other products that require a soft hide. Perforated PU coated fabric PU (polyurethane) coated fabric Lining Tri-fleece liner - This polyester tricot fabric is used for glove lining, and brushed to provide extra warmth without adding any bulk. The lining wicks moisture away, to prevent hands from getting damp. Protection Outseam stitching by Guterman - Marketing calls it PWR yarn Temperfoam® finger knuckles - The self-contouring foam is used in areas where mobility and fit are a must, like the finger knuckles. Temperfoam® comes in a solid version as well as a perforated version. TPU hard shell finger knuckles - Thermoplastic Urethane (TPU) is a highly durable synthetic material, used in many REV’IT! products for protection and waterproofing. TPU hard shell knuckle TPU hard shell little finger protector TPU hard shell palm slider - Palm slider made of a durable and high abrasion resistant TPU material at the palm side of the glove. The palm slider makes sure that the glove slides in case the palm of the hand comes in contact with the asphalt. The abrasion resistance of gloves equipped with these sliders is greatly increased, thus reducing the risk of injury significantly. TPU hard shell thumb protector TPU cuff protector - We use Thermoplastic Urethane (TPU) - a highly durable synthetic material – at the cuff of these gloves to add additional impact protection and to optimize sliding in the event of a mishap. Ventilated dual comp protector - The dual-comp protector consists of a 3D, pre-shaped honeycomb structure of TPU material, topped by an aluminum high-impact shield, for ultimate sliding. This lightweight hard part increases the level of protection significantly, without adding the considerable weight of traditional plastic hard parts. The dual comp protectors have been perforated to allow airflow to enter the gloves keeping your hands cool and comfortable.
Protection certified under norm EN 13594:2015 "protective glove for motorcyclists" hard plastic knuckle protection knuckle protection tested (impact test for knuckle protection) ball of thumb reinforced with SuperFabric®-brand material underlaied with Armaprotec Fit/features visor wiper silicone-printed palms velcro adjustment at cuffs air-vents on fingers Lining unlined palm silk lining Polyester Outer shell goatskin palm Nyspan and microfibre back colourfast & sweat-proof
Material tear resistant goat leather Safety knuckle shell with Temperfoam® reinforcements on fingers according to EN 13594:2015 "protective gloves for professional motorcycle riders" Ventilation AirFlow: mesh panels for best ventilation AirFlow: perforated goat leather on inside hand Other Features Touch Tip on thumb and index finger: easy operation of smartphone and navi
The new generation of AFS (Air Flow System) put the stress on the quality of the ventilation as well as the ergonomic. Already well known for these features, the new AFS is now creating a new standard, thanks to new protection shells, specifically designed by Furygan’s Motion Lab to Maximise the air flow inside the glove. Features Palm is 100% goat leather for softness and comfort. Furygan Skin Protect Lining. Approved by Furygans R&D (Motion Lab) to reinforce leather products in terms of tearing and abrasion resistance. External protection shell for scaphoid, metacarpals, pal, fingers and side of the hand. The AFS-18 features “Exo Technology” for a better shock absorption and a better comfort by suppressing all hard elements inside the protection shells. Multiple reinforcements made with doubled leather layer and additional foam on areas exposed to abrasion in a crash situation. (pal, cuff, fingers.) the positioning of these elements has been designed to protect hands from shocks but also from long abrasion on tarmac. The goad leather and the pre-shaping offers a high level of felling on the handlebars. Finger stitch seems positioned on the outside, and Exo protectors for better comfort. Furygan AFS (Air Flow System) for an optimal breathability trough air channels positioned on the top of the hand and on the thumb. Leather is also perforated in specific places for optimal air flow without compromising on the leather solidity. Wrist and cuff adjusters. The cuff features stretch in order to have better fit, and to be easier to put on. Compare to the previous the protector shape has been modified on the fingers for better ergonomics. Articulated metacarpal protection shell to ease finger flexion.
Constructed from perforated leather making it soft and light, the Furygan TD21 is a glove that keeps your hands cool on warmer days without compromising on protection. Specifications: Main external material: 100% goat leather, for softness and comfort. Furygan Skin Protect lining – approved by Furygan’s R&D (Motion Lab) to reinforce leather products in terms of tearing and abrasion resistance. External protection shell for metacarpals. Multiple reinforcements made with doubled leather layer and additional foam on areas exposed to abrasion in a crash situation (palm, cuff...). The goat leather and the pre-shaping offers a high level of feeling on the handlebars. Perforated leather for air flow. Wrist adjusters. Comfort reinforcement on top of the palm and inside the thumb. Between each finger, at the bottom, has been place a specific textile insert to reach a superior stage of comfort.
A newcomer in the 2020 collection, the RFX Sport is now the entry-level style for Five´s Racing range. It’s more focused on comfort than performance, and is designed for riders looking for an effective, accessible glove for everyday riding on a sport or road bike. It offers a more-than-satisfactory level of protection and comfort for road use, with its goatskin construction, main one-piece PVC shell concealed underneath the leather (perforated for an energetic look), multiple foam reinforcements, and TPR hypothenar protective shell. It deliberately retains a relatively classic look for a sport glove, so it can be your perfectly discreet companion from the road to the office. Features Full-grain goatskin construction (topside and palm) for extreme suppleness PVC metacarpo-phalangeal protective shells under leather (perforated for a great look) Stretch comfort gusset over the wrists External stitching on the fingers Palm and ring and little finger reinforcements in synthetic leather TPR hypothenar protective shell (palm slider) Dual closure system with an adjustment tab under a protective flap Forearm protection from foam reinforcement under leather Index, middle, little finger and thumb knuckle protection from foam under leather Reflective nighttime visibility panel
Sporty motorcyclist but often and long-lasting on the road? Then the Apex is your ideal choice! The glove is just a bit more comfortable than a hardcore racing glove, but offers the necessary protection as soon as you go down! The Apex is actually equipped with a Carbon knuckle protector and R.I.S.C. finger and palm protection. With the 30º buckle and touch tip you can easily operate your GPS or phone with your gloves on and makes the Apex a real all-rounder. Features Made of goat and cow leather Reverse Bemberg lining for more comfort on longer distances R.I.S.C. carbon knuckle protection R.I.S.C. finger and palm protection 30º buckle, more freedom of movement at the wrist Ergonomic thumb, the leather of thumb and forefinger consist of 1 whole for more wearing comfort Touch Tip, for operating your smartphone or GPS with gloves on