Cable with 12V car cigarette lighter socket (diameter 21 mm) for direct power supply WarmMe Capit heated clothing excluding the use of batteries. Can also be used to recharge batteries from 12V cigarette lighter socket. If used with heated gloves it must be combined with the splitter cable (sold seperately).
The intelligent battery charging and maintenance device OptiMate 2 is the cheapest solution for the long-term battery maintenance of batteries with 12 V in vehicles / tools, which are parked indoors or outdoors. OptiMate 2 is weatherproof and extremely user-friendly: simply connect it to the battery and plug it into the nearest socket. The rest is fully automatic. OptiMate 2 automatically charges the battery with a constant current of 0.8 A and then switches to the unique battery-saving OptiMate maintenance mode to keep it at 100% standby. At the same time, the supply of consumers such as on-board computers, display or alarm system with electricity is ensured. OptiMate 2 extends the battery life by up to 400%, with OptiMate 2 maintained batteries last up to 8 years. Connect the OptiMate 2 to the parked vehicle battery. OptiMate 2 ensures that the battery is always 100% charged, but without overcharging it. This works thanks to the unique charging cycle of long-term battery maintenance, in which 30 minutes of charging alternate with 30 minutes of pause. Recommended for STD (with filler caps), sealed AGM (with glass fleece) and sealed lead GEL batteries with 12 V and up to 50 Ah. It is also possible to connect more powerful batteries (but this lengthens the charging time). Weight only 450 g including cable. Can be connected to any power supply with 100 - 240 VAC. OptiMate 2 can be used worldwide. 2 connecting cables: (see illustrations on the right) SAE-71 permanent connections with metal eyelets and weather proof cap and SAE-74 set of battery terminals. Fully automatic operation with all safety devices such as polarity reversal protection and protection against sparks during connection: approved according to safety standards for automatic battery charger according to UL and CSA. Features Modern care for batteries with 12V Intelligent and modern functions Sealed, weatherproof housing 24/7 safe long-term battery maintenance Can be used internationally Charging power (amp): 0.8 Loading levels: 4 Intelligent control Suitable for: scooter and motorbike 3-96Ah
X-Connect 12V Indicator displays your batteries state-of-charge in 25% increments. It permanently attaches with 3/8-inch eyelet terminals to your 12-volt battery, and integrates with X-Connect accessories for plug-n-play charging. Ultra-efficient LEDs flash, showing the current charge status and draining almost zero power from the battery. Displays battery state-of-charge in 25% increments. Integrates with X-Connector accessories for charging. Ultra-efficient design drains almost zero battery power. More ways to charge with plug-n-play accessory changes. Rugged, watertight connector for extreme environments. More ways to charge. Rugged, water-resistant plug-n-play connections for maximum performance. Permanently mount eyelet connectors on multiple vehicles to make hard-to-access batteries easy to charge. Charge through the 12V auxiliary or OBDII port from inside a vehicle, or simply extend the reach of your accessories. Whatever the case may be, X-Connect creates a solid weatherproof connection that provides maximum current flow and makes interconnecting different applications fast and easy. The possibilities are endless. Charging status. Easily view the health of your battery. Ever wonder how much juice you have left in your battery? This indicator will show how much battery power is left by using pulse LED lights, which consume almost zero power. Safety first. An added layer of protection. Sometimes electrical systems can overload or short-circuit if not used correctly (like pushing too much power, or jamming the cord in your door or hood). Although those situations are rare, the fuse is there to stop any potential harm to you or damage to your equipment. Input X-Connect Battery Level Indicator Output XL (3/8-Inch) Eyelet Terminals Fuse 10 Amp Regular Blade ATC Wire Size 16AWG Length 24 Inches Compatible With G750 (All Versions) G1100 (All Versions) G3500 (All Versions) G7200 (All Versions) G4 (All Versions) BLSOLAR2 BLSOLAR5 XGS4AUTO XGS9AUTO
Rechargeable lithium battery. Replacement for WarmMe socks, available in standard 2200 mAh version (7 hours duration) with temperature selection button with 3 levels.
On-board power socket adapter for ICON I.T. series heated gloves (except IT-Aso & IT-Yate (2019) models) Features 12V-7.4V motorcycle power socket adapter suitable for the It-series range from 2020 on Fits for BMW and universal power sockets
The most ADVANCED & TRUSTED battery charger in power sports! OptiMate 4 Dual Program includes two charging programs, program 1 is for direct charging of a battery, program 2 allows safe and unsupervised charging through a BMW motorcycle’s CAN-bus controlled 12V socket. OptiMate 4 Dual Program tests before & after charging and can recover a ‘dead-flat’ battery from as low as 0.5 Volts. Special features in CAN-bus program: Automatic KEY-LESS activation and continued maintenance until charger is disconnected. Safe low voltage pulse desulphation. Features CHARGING AMPS: 1A (constant current) USE: Indoor / Outdoor (lowest temperature: -40°F / -40°C). SAVE: Low Volt Start of 0.5V + 2-step* desulphation recovery (*1-step low volt pulse save during CAN-bus mode). IDEAL FOR: STD, AGM & GEL 12V batteries from 3 – 50Ah. INPUT: Global (100-240V 50-60Hz), high efficiency (CEC listed), fully sealed. STYLE: Weatherproof case with wall mounts, with 6ft / 180cm AC supply lead and 6ft / 180cm charge lead ending in SAE connector. Weatherproof battery lead & standard battery clip set included. SAFE No risk of overcharging. Totally safe for vehicle electronics. Sparks suppressed. Safe for long-term battery maintenance. Automatic shut-down if short-circuited or battery disconnected. 3-year limited replacement warranty.
X-Connect 12V Female Plug can be used with the G7200 battery charger with 13.6V Supply Mode to provide auxiliary power to common 12-volt devices, like a tire pump, heated seat, coffee maker and more. Pair up with the male-to-male coupler and combine multiple accessories. Note: this accessory is NOT compatible with any of the Boost models. For the G7200 battery charger. Conveniently connect to any existing wiring connections. Perfect for connecting to other 12-volt devices. More ways to charge with plug-n-play accessory changes. Rugged, watertight connector for extreme environments. More ways to charge. Rugged, water-resistant plug-n-play connections for maximum performance. Permanently mount eyelet connectors on multiple vehicles to make hard-to-access batteries easy to charge. Charge through the 12V auxiliary or OBDII port from inside a vehicle, or simply extend the reach of your accessories. Whatever the case may be, X-Connect creates a solid weatherproof connection that provides maximum current flow and makes interconnecting different applications fast and easy. The possibilities are endless. 12 volt power. Turn your battery charger into a 12-volt power source. A battery charger that can do more than just charge batteries - power 12-volt devices. Easily convert your charger into a 12-volt power source for powering tire pumps, power inverters, lights and more. Use the X-Connect Male-to-Male Coupler to connect multiple accessories together for endless possibilities. Safety first. An added layer of protection. Sometimes electrical systems can overload or short-circuit if not used correctly (like pushing too much power, or jamming the cord in your door or hood). Although those situations are rare, the fuse is there to stop any potential harm to you or damage to your equipment. Input X-Connect Female Output 12 Volt Female Plug Fuse 10 Amp Regular Blade ATC Wire Size 16AWG Length 24 Inches Compatible With G7200 (All Versions) GC003 GC011 GC019 GC020
On-board adapter for ICON I.T. series heated gloves (except IT-Aso & IT-Yate (2019) models) Features 12V-7.4V motorcycle battery connection kit suitable for the It-series range from 2020 on
OptiMateTM lithium 0.8A, the OptiMate maintenance device for the most effective protection of your LiFePO4 battery. The new OptiMate lithium 0.8A protects your investment and ensures that your Lithium Iron Phosphate Battery (LiFePO4 / LFP) will deliver the promised benefits for a long time. The unique LiFePO4-specific program of the OptiMate lithium 0.8A ensures efficient and safe charging and balancing of the cells in the battery. The maintenance program of the OptiMate lithium 0.8A supplies power to the circuit of the vehicle, protects the battery and keeps the charge at 100%. Features Recommended for LiFePO4 / LFP batteries up to 50Ah Program control LiFePO4 microprocessor AC power supply 100-240V 50-60Hz, 0.23A at 100V - 0.15A at 240V Drain back current below 0.001A Output current (basic charge) 0.8A Charging time limit 48 hours (maintenance time: unlimited) Maintenance / test cycles 30 min / 30 min (changing hourly) Load holding test range: 10.1 - 13.2V. OK (green) = battery voltage> 13.2V Size 167 x 65 x 46 mm Weight 0.4kg (0.6 kg) Housing classification fully encapsulated (IP54), 4 wall mounting brackets input cable length 2m Output cable length 2m Supplied accessories O-01 weather-resistant permanent connection cable O-04 Crocodile / battery terminals Operating temperature range -20 ° C / + 40 ° C Power consumption (no battery connected) 0.0089kWh / day Ratings / Approvals Safety, EMC, energy efficiency, enclosure protection class
X-Connect 10-Foot extension cable allows you to extend the reach of your battery charger and accessories, making it easier to reach awkward locations. Extend the reach of your battery charger and accessories. Add an additional 10-feet length to any connection. Built-in fuse protection for increased safety. More ways to charge with plug-n-play accessory changes. Rugged, watertight connector for extreme environments. More ways to charge. Rugged, water-resistant plug-n-play connections for maximum performance. Permanently mount eyelet connectors on multiple vehicles to make hard-to-access batteries easy to charge. Charge through the 12V auxiliary or OBDII port from inside a vehicle, or simply extend the reach of your accessories. Whatever the case may be, X-Connect creates a solid weatherproof connection that provides maximum current flow and makes interconnecting different applications fast and easy. The possibilities are endless. Going the distance. Need a bit more cord? No problem. Quickly extend the reach of most X-Connect accessories with 10 feet of extension cable, perfect for large cars or extending the reach of X-Connect accessories. Adding multiple extensions is possible, but could effect charging times/power output. Input X-Connect Female Output X-Connect Male Wire Size 16AWG Length 10 Feet Compatible With G750 (All Versions) G1100 (All Versions) G3500 (All Versions) G7200 (All Versions) G4 (All Versions) BLSOLAR2 BLSOLAR5 XGS4AUTO XGS9AUTO
OptiMateTM3, the universal tool for 12V battery maintenance at home. Performs diagnostics, resuscitation, charging, testing and maintenance automatically. OptiMate 3 has fully automated, 100% secure, user-friendly features of the 2 million OptiMates produced since 1995, but is now microprocessor-controlled, lighter and more efficient than ever before, and also has an international input (100-240V). It is 33% more powerful than its predecessor. Have you forgotten your battery during the winter? OptiMate 3 revives your deep-discharged battery and charges it optimally. Afterwards it is checked, whether the delivered load is the best possible, then it is checked how well the battery can hold the charge. The status can be read at a glance. This will of course ensure that your battery is fully charged every month. In addition, the battery life is extended by up to 400%. This ensures less waste and is more environmentally friendly. Features Recommended for AGM / MF, standard, GEL and spiral cell batteries 2.5Ah to 50Ah nominal capacity Program control 5 phases, fully automatic Input voltage: 100-240V ~ 50-60Hz, global input Drain back current less than 1mA Output current (main charge) 0.8A Automatic desulphation Charging time limit unlimited Maintenance / test cycles 30 min / 30 min (changing hourly) Charging maintenance monitoring for 30 minutes, no charge intervals Size 167 x 65 x 46 mm Weight (packing) 0.4kg (0.6 kg) Housing classification fully encapsulated (IP54), 4 wall mounting brackets Input cable length 2 m Output cable length 2 m Supplied accessories O-1 weather-resistant permanent supply O-4 crocodile / battery terminals Operating temperature range -20 ° C / +40 ° C AC power supply 100-240V 50-60Hz, 0.23A at 100V - 0.15A at 240V Ratings / Approvals Safety, EMC, energy efficiency, housing protection class IP54
Y-cable for connection to car or motorcycle power supply for continuous power supply of gloves for long journeys. Length 1.3 m. On-board voltage charging cable additionally required.